Andisi gas spring: good product with *0 years service
life
The free gas spring has the longest length in free state (shortest
travel) and can be pressed to the shortest length (longest travel).
There are only two states for the free gas spring: compressive
state (pressed by outer world) and free state. It can not lock
automatically when in use. The free gas spring is mainly used for
support.
Features:
1. More advanced technology:
original GOOS gas and oil mixture one-step molding technology; make
the stability and good product rate increased by over *0%.
2. Better material: well-selected qualified A plate, the 1mm thick
pipe can undertake **0N air pressure and stable inert gas nitrogen
is added to ensure the safety of products.
3. Stricter inspection: beside the European SGS inspection
identification, the company sets professional inspection equipment
to ensure the quality of products.
4. Better structure: the particular whole bumper application in
structure avoids the impact.
5. Longer service life: the test switching time reaches about
**0,**0, *0%~*0% higher than other like products.
6. Longer screw thread design: the length of our gas spring is 2mm
longer than that of others, thus to avoid the screw loose to the
most extent.
Technical data:
Product name: gas spring
Gas: inert gas nitrogen
Material: Iron pipe (besides filled with nitrogen, the iron pipe is
painted with sound attenuation oil in the inner wall to anti-rust,
lubricate and endure high temperature.)
Surface treatment: spare part plating (nickel, white zinc)/iron
pipe painting
Switching times: the test technical data reaches *0,**0 to **0,**0
compression travels (Over *0,**0 is qualified.)
Lifting capacity: *0N/*0N/**0N/**0N/**0N
Color: silver gray
Usage: the gas spring is used for upturning the wooden door and
aluminum-framed door
Advantage: the gas spring adopts whole cushioning and silent in use
design
Irony fittings: the surface is smooth without scrapes or burrs; no
deformation or burrs; no burrs of the product appearance; smooth
screw without deformation or burrs.
Plastic fittings: no splay wave, shrink, deformation or burrs on
the surface.
Installation instruction:
1. The gas string
shall be installed downwards so as to reduce friction and to
guarantee the best resistance mass and bumper capacity.
2. Determining the installation site of fulcrums is the guaranty of
right installation. The gas string shall be properly installed in
accordance with the diagram below, that is, it shall pass the
central line when close, or the gas spring will always open
automatically.
3. The gas spring shall not be pressed by aslant or horizontal
force when in use and shall not be used as a handle.
4. In order to secure the reliability of tightness, the surface of
gas spring shall not be destroyed. Painting the paint or chemical
materials on the gas spring is forbidden and painting after the
installation of gas spring is also not allowed.
5. Gas spring is a high-pressure product. Do not dissect, bake or
drop it at random.
6. Environment temperature: **5℃-**0℃ (specially manufactured
*0℃)
7. The installation connecting points shall be flexible without
obstruction.
8. The size shall be reasonable and the force shall be proper, and
another *0mm is retained for piston rod travel.
Â
