copper ore concentration plant, copper ore production equipment

Description

Common equipment used for Copper ore Concentration Process Equipment commonly used for copper ore processing includes: jaw crusher, fine crusher, ball mill, swaying or chute feeder, spiral classifier, mixing tank, flotation machine.  

Concentration Process for CopperOreSelecting:
1.       Crushing and grinding stage The extracted ore should be crushed by jaw crusher initially and then by fine crusher. When it gets the reasonable fineness, it is transported into ball mill by elevating conveyer and feeder, and is milled by ball mill.
2.       Classifying stage The subtle milled ore gets the next procedure: classification. There is a theory that if the weights of solid particles are different, the sedimentations will be different, and the mixed ore can be classified by screw classifier.
3.       Mixing and Floatation stage The classified ore gets into mixing tank for fully mixing. At this stage, chemical agent for foam can be added. After fully mixing, the slurry will enter into flotation machine.      

When the floatation machine works, the motor drives the impeller to revolve, so the centrifugal effect and negative pressure are produced. On one hand, ample air is absorbed and mixed with mineral slurry, on the other hand, the mixed mineral slurry is mingled with additive, meanwhile, the foams are thinning, the mineral is bounded with foams, and floats up to the surface of mineral slurry and the mineralized foam is formed. The liquid surface can be adjusted with the height of adjustment flashboard, so that the useful foams are scraped with squeegee.
4.       Concentrator thickening and drying Then copper concentrate is separated from others. Since the separated ore are wet, they should be dewatered by thicker initially, and dried by dryer.

Our service can supply for you:

1. Proving beneficiation technology and consultation   
2. Raw ore testing and evaluation   
3. Site chosen consultation and evaluation.   
4. Site design and layout design.   
5. Installation, erection, and commissioning instruction   
6. Workers training.

Pls feel free to contact us by supplying the following information: What are the raw material and its size? What is the raw material element analysis? if you have, pls send us the raw ore element analysis report and copper ore phase analysis. What is the capacity? What is the concentrate grade you need?