Description
Paint Bucket
Mould
- With short cycle time(<*0 SEC)
- Beryllium insert for the core top and cavity neck
- Optimization layout for quick air ejector
- Optimization layout for cooling system
- Full arrange from 0.5L**5L
Pail mould technical points
explainations.
A. the explain regarding the pail
mould core eccesntric causing the pail wall thickness not even and
the pail out of center.
1. If the cooling is not equal in the different area of the pail
mould core and cavity, this will cause the following difference of
the melted material, the more hot area flowance will be bigger and
the colder area the flowance will be smaller. then the hot area's
pail wall thickness will be thicker. The temperature difference
normally caused at least 0.*5mm...
2.Normally, the pail mould the
interlock height should be *0 to *0% of the plastic pail's height,
for example the smaller pail should be *0%, the bigger pail mould
should be around *0% height.
3.The machining process is meaning
which kind of machining should we select and what we should take
care when we make the machining to the pail mould core and
cavity.
Mould material: S*5C, P*0, **8,
**8H, ***8, **8H, NAK*0, SKD*1, E**0, Beryllium etc. (For
Reference)
Mould Base: LKM or
Self-made.
Hot Runner: YUDO, HASCO,M-H-R, etc.(For
Reference)
Mould Components: HASCO, DME, PUNCH,
JINHONG,etc.(For Reference)
Design
software?UG, PROE,CAD,
Solidworks
Runner system:1point pin-point
gate/cold-runner
Ejection system: stripper plate from the
injection side
Moulds running: full automatic
Delivery time?*0 work days
Mould life?**0,****1,**0,**0 shots
Payment Terms:T/T or
L/C
After-sales Services: Experienced
plastic mould engineers will provide all-round technical solutions
to any problems occurred in customers' mould operation.
Features:High efficiency, short delivery
time, *
*/*/*/*/*/*/*
*
*@********************y>
