Sell Iron Door

Description

1.The thickness of our door stile and jamb is*0mmor *0mm with the width at **0mm or **0mm on the stile. Or upon request we can custom made the door stile and jamb. Our doors are manufactured in *2 and *3 gauge steel framing. Our metal jambs are manufactured including the threshold. With this we will make easy the delivery and the installation.
2. All the doors will be injected the polyurethane foam for insulation that is pumped into the tube. With this you will avoid excessive sounds and increase energy efficiency.
3. The Q-Lon weather stripping is used around the door frame, glass window frame and Astragal, making the door weather tight.
4. The doors will be double bored with *4mm (2.**5 inches) bore, **0mm (5.5 inches) center to center, and *0mm (2.*5 inches) backset. Door jambs and semi -stationary door edges need to be bored to accommodate the keeper in for the lockset and deadbolt. In our double doors we use flush bolts. This is a mechanism that locks the inactive door.
5. All doors are manufactured with 5/8 inches interior double-pane tempered insulated glass panels that open independently from the doors. . With this we make it easy to clean the windows.
6. All mounting flanges will be recessed *3mm (0.5 inch) from the edge of the inside frame to allow for sheetrock.
7. We manufacture single or double doors, with sidelights or without them and with any arch shapes: full arch, flat arch, soft arch, square top, gates, patio doors, rails ,stairs, and grills.
8. Our doors will be installed 3 heavy duty ball bearing hinges per side.
9. All the doors will be sandblasting + spray hot zinc for rustproof, then spray 2 layer of paint and each level of the paint will be baked for 2 hours , and then hand paint finish color. Our doors can be keep it�s original color for 7 years(our paint was exported from Japan.).
*0. We can do any colors as per customer�s sample color.
*1. Packing: Wooden crate