FOB Price
Get Latest Price2.4 / Square Meter
|Minimum Order
Place of Origin:
Hebei(China)
Price for Minimum Order:
Minimum Order Quantity:
100 Square Meter
Packaging Detail:
according to customers' request
Delivery Time:
15 days after placing an order
Supplying Ability:
20000 Square Meter per Month
Payment Type:
L/C, T/T
連絡先担当者 Anna
Beijing, Beijing
Plastic Coated Expanded Metal is made by PVC coating on finished expanded metal, most materials before PVC coat are Aluminum expanded metal or Plain Steel expanded metal. Other kind of expanded metals can also be PVC coated at request.
Plastic Coated Expanded Metal are manufactured
in different materials, available in rolls or sheets with standard
sizes and thickness and to measure on request.
Plastic Coated Expanded Metal can be used as
architectural mesh Panels; Catwalks; Drying Racks; Fencing;
Gratings; Flooring; Grilles; Vents; Enclosures; Security
Partitions; Reinforcement; Railings; Ramps; Walkways; Window
Guards
Expanded metal is an extremely versatile material, available in a variety of ferrous and non-ferrous metals and a wide range of mesh sizes.
Wuzhou Kingda manufactures a full range of standard and
flattened expanded metal, structural grating, micro mesh and
decorative patterns. Raw material can be produced in carbon,
galvanized, stainless steel or high strength alloy steel. Certain
alloys of copper, brass, bronze and plastics can be expanded as
well.
Cleaning - Carbon expanded metal is lightly oiled and should be cleaned before finishing. The most common cleaning method is an acid or solvent bath with a water rinse. For aluminum, use a non-etching chemical or detergent, then rinse and dry thoroughly.
Anodizing - A surface treatment for aluminum where an oxide
coating is added electrochemically to the metal. For interior
abrasion resistance a .***5" coating is necessary. Medium abrasion
applications for interior or maintained exteriors need a .***4"
coating. Use a .***8" coating for exteriors.
Porcelain Enamel - Porcelain enamels can be readily applied to
expanded metal. Forming, cutting, welding and drilling should be
done before applying the finish. All surfaces should be
covered.
Painting, Lacquering, Plastic Coating - Be sure the coating used
has good surface tension or wetting properties and viscosity to
prevent any pullback from metal edges and webbing-in of
diamonds.
