Sell poe switch

Description

 POE Switch PSKY-NETSWITCH-PSE*8X2PORT

POE Switch,PSKY-NETSWITCH-PSE*8X2PORT,A *-port network powered *0/**0M self-adapting Ethernet switch. Has *6 RJ**-ports.

PKSY-NETSWITCH-PSE*8X2PORT is a *-port network powered *0/**0M self-adapting Ethernet switch. It has *6  RJ**-port. Its 8 ports in up line can be used as a common net switch, its 8 ports in down line can be used as the data and power transmitting, each port can offer the max power as *5.4W.  The net cables between up line and down line are corresponding

Output Frequency: ****0HZ 
Output Current: 3A 
Brand Name: PSKY
Model Number: PSKY-NETSWITCH-PSE*8X2PORT 
Place of Origin: China (Mainland) 
Output Power: **1 - **0W 
Output Type: Single 
Input Voltage: **0V  

PoE save your power infrastructure cost:
 
PoE allows power to be supplied to end devices, such as wireless access points or VoIP phones, directly through the existing LAN cables. By supplying the power end-span, you can centralize power distribution and backup without the need to increase infrastructure

PoE features
 
1. Supports IEEE **2.3af compliant.
2. Supports power over ethernet (PSE) on each PoE-TP port (end-point).
3. Full power(*5.4w) support for per PoE-TP port.
4. Auto detect powered device and consumption levels.
5. Smart feature for PD on/off, PD detection, power level, PD status and power feeding priority.
6. Automatic fault detection(over/under voltage & current).
7. Thermal shutdown protection(Tj > **0c).
8. LED indicators for and PoE activity.

Please note:
1. PSE*****4V/POE**1 does not comply with IEEE**2.3af, Don connect any of it to an IEEE**2.3af devices.
2. For PSE*****4V, it will inject power all the time when it is connected with a AC/DC *4V adaptor. It means that (pin: 4, 5, 7, 8) inject power all the time, so when you connect it into network, please make sure the safety of body and connected equipment.
3. PSE*****4VS is not an IEEE**2.3af complied device, PSE*****4VS will not detect and reply the signal from **2.3af injector. As a result, the Power LED will never turns on if you connect to an IEEE**2.3af injector and never power the remote device as well.
4. Gigabit Ethernet is not allowed to usePSE*****4V/POE**1 products since pair 4, 5 and pair 7, 8 are all being used. Only *0/**0M TX can apply with ourPSE*****4V/POE**1.
5. For safety reason, PSE*****4V/POE**1 will only support device with power consumption below *2watts. Please make sure the remote Ethernet device is under the range of *2V/1A, 9V/1.2A, 5V/2A.
6. Please by usingPSE*****4V/POE**1 together on both sides of cable all the time.

3. Application:
OPTOSTAR PoE Save Your Power Infrastructure Cost.
PoE allows power to be supplied to end devices, such as Wireless Access Points or VoIP Phones, directly through the existing LAN cables. By supplying the power end-span, you can centralize power distribution and backup without the need to increase infrastructure

 
Payment Terms: T/T,Western Union
Minimum Order Quantity: *0 Set/Sets
Supply Ability: ***0 Set/Sets per Month
Package: **3***6**4mm 0.*3kg
Delivery Time: *4 working days