Description
Specifications:
Input Voltage: *2 Volt
DC
Ground: (-) Negative
Current Draw: 0. *0
ma
Anode Composition:
"ECC™ Capsules"
non-sacrificial
Command Module Size:
Anode: *0mm X *0 mm
Weight: **0g
The ECC ® Rust Control module
attaches to your regular car battery and draws about as much
current as your cars clock. Over every 8 second cycle it emits a
surge of "free" electrons throughout your vehicle to the very
places your car has lost its protective paint and coatings (through
stone chips, scratches, and abrasions) and "shields" these exposed
areas from harm. The charge is too small to be noticed, however the
free electrons interfere with the rusting process and retard rust
and corrosion significantly.
ECC is one of a kind and
substantially extends auto body life through “Electrolyte
capacitive discharge oxidation interference” (ECDOI), a form of
impressed current technology.
The ECC ® Rust Control module
consists of a black color module with
1 anode
2 flashing LED’s Red &
Blue that indicate the product is functioning
correctly.
Digital Display for Battery
Voltage
Glass cover on Led’s &
Digital display
Over voltage safety
Fuse.
Black & Read Battery
wires
Installation:-
Connect the +ve ECC wire to +ve Battery
terminal.
Connect the -ve ECC wire to -ve Battery
terminal.
ECC Light will be Glowing.
Select the suitable place for ECC module &
Conductive Pad Fixing.
Clean the surface with cloth
Remove the back side sticker cover from Module
& past it on Vehicle body.
Remove the back side sticker cover from
Conductive Pad & past it on Vehicle body.
The installation is completed.
