Description

Xenon Lamp Technical Parameter:

1. Input Voltage to detect:

   High input voltage *3±0.5V or low input voltage 6.5V±0.5V will be protected, if the voltage is back to normal≥8V±0.3V, the stabilizer can be restart.

2. Input Starting Current:≤8A±0.5A (Input *2V);

3. Stable Current:3.2A±0.*5A  (Input *2V);

4. From the start to the stabilization time:≤*0S (Input8A*4A);

5. Steady shot and waterproof: Accord with auto technology-related standard;

6. Output short circuit protection:

   Time≤2S,start ballast every 2S, test *0S and the ballast is normal;

7. Output short circuit protection:

   Time≤2S, start ballast every 2S, test *0S and the ballast is normal;

8. Continuous turning on and off the Xenon lamp:

    Starting ballast just need 1s, and test *0s then the ballast is normal;

9. Continuous opening:

    Don’t take the load to start ballast, test *0s (5 times), the ballast is normal;

*0. Continuous short-circuit:

      Do not take the load to start ballast every 1s, test *0s (5 times),and then the ballast is normal;

*1. Continuous working:

      Continuous with xenon lamp, after 7 days the ballast is normal;

*2. Load-adaptive test: