DZSF linear rice/flour/milk/grain vibrating screen machine

Description

Linear vibrating screen uses vibrating motor as vibration source. Materials on the sieve tosse and then leap forward in a straight line, so as to achieve the purpose of screening and grading the materials. Low energy consumption, high efficiency, simple structure, easy maintenance, fully closed structure without dust scattering.
Character and usage:

1.      High accuracy and efficiency. Used for the powder, or gain, solid, liquid. The screening finest attain **5mosh/inch.

2.      With the structure of sealing completely. the noise is low, have no powder pollution

3.      simple construction, easy to maintain. Low power consumption. The net’s life is long. Convenient for automation operation

4.      can be used by single layer or many layers. Can attain 5 layers at most.

5.      if it is used for causticity material, the part that get in touch with material should use stainless steel.

6.      with the professive vibrating motor as the vibrating power source, it ensure the stable power take-off.

7.      the bounce ball could prevent the mesh from be blocked through jumping from up to down.

8.      All- enclosed design, and a removing-dust hole on the cover , make the machine have no powder pollution.

DZSF series linear vibrating screen are very useful in plastic, rubber, ceramic, food, pharmaceutical, chemical, fertilizer, glass industries. Vibratory screens can be provided with dust proof cover as required. ZSF series linear vibration screen can be supplied of different sizes depending upon capacity required. They can also handle slightly wet material. Inlets, outlets and legs can be custom fit to your installation requirements.

Installation and Adjustment
1. Motor should be fastened on the mounting surface which must be smooth and flat.

2. Adjust the vibration force.When the motor rotation direction doesn’t meet requirements, you can adjust the power phase sequence.

3. The machine is running early, which should be checked at least once a day to prevent loosening.

4.The machine running time add up ***0 hours, you should check the bearings, if there is a serious injury should be immediately replaced.

 Daily maintenance:

1. Before running

  (1) to check coarse mesh and fine mesh if there is a damage

  (2) each group clamps is locking.

2.Running

  (1)notice any abnormal noises

  (2)electric current is stable

  (3)whether the vibration is abnormal.

3. After running

  (1)after used clean up the vibration every time

  (2)to inspect regularly the coarse mesh , fine mesh and the spring if there are fatigue and damage

  (3)whether each part of the vibrating body caused damage due to vibration.

  (4)need to add the site to be the lubricating oil

 Notes

   According to our client's needs, our company can design and manufacture sieve machine of special models and specifications. Our company shall reserve the right to modify all technical information and size.