medical splint, splint, polyester splint

Description

HESHUN SPLINT 1.The product is made of multilayer polymer fiber saturated by Polyurethane and polyester.Before use,it needs to be activated by water.The polymer fiber is in non-woven protective layer,which makes patient feel comfortable in use. 2.New material of orthopaedics external fixation!New products substituting plaster padding. 1.EASY-OPERATED DEVICE The whole operation is finished within 3~5 minutes without any heating equipments but by only using the normal-temperatured water,which not only eases the labour for doctors,but also saves the time of operation. 2.X-RAY PERMISSIBILITY The doctors can examine the broken parts clearly without removing the casting and splint,which ensure the accuracy and integrity of the operation. 3.EXCELLENT AIR-PERMEABILITY The holes on the products make good air-pereability and prevent skin from infection,itch and smell. 4.HIGH STRENGTH The strength are five times that of the plaster products,which can make the injured part protection more effectively. 5.LIGHTWEIGHT Heshun Cast and Heshun Splint are only 1/5 heavier and 1/3 thicker than plaster products,which makes the pacients feel more comfortable. 6.VARIOUS SPECIFICATION The products will satisfy different needs of injured parts and color-preference for diff erent ages. 7.ENVIRONMENTAL PROTECTION Heshun Cast and Heshun Splint are made from polyester or glass fiber.After operation,they can be burnt without pollution. How to use: 1.Choose proper specification according to need. 2.Open the package and take out the splint.Saturate it in water for **4 seconds and press it **3 times. 3.Take it out and press out the water.Absorb the water with a towel. 4.Plase it on the needed part and fix it with bandage. 5.It will be hardened after **5 minutes and be capable of use after *0 minutes. Use to Notes 1.The hardening of the splint has direct relation to the water temperature,temperature is high,hardening quickly,temperature is low,hardening slowly. 2.The whole operation must be finished in **5 minutes,some delay will affect the shaping effect.Within *0 minutes hardening time, the affected part cannot move.