Sell reinforcing mesh

Steel Bar Welded Wire Mesh /cold roll with rib reinforcing bar
ISO***1: ***8, UKAS
Opening: *5mm ~ **0mm
Length: 1m ~ *4m, width: 1m ~ 3m
Wire diameter: 5mm ~ *6mm
Steel Bar Welded Wire Mesh Panel is made of superior quality steel bar, with flat even surface, firm structure. This process technology is one of the ten new construction technology in ***5. It is widely used in construction reinforcement, the ground for the tunnels, bridges, highway, airport and wharf, wall, etc.

Features of reinforcing mesh
The unique deformed wire pattern (curry pattern) offers superior bonding, improved stress distribution and crack-width control
Ferro-Fabric is available in a wide range of diameters and apertures. The products can be bent to shape as required
Manufactured from hard drawn wire (smooth) and cold rolled wire (deformed)
All intersections are resistant-welded thereby not reducing the tensile strength of the wires
Mesh has an average shear strength equal to *0% of the wire strength
The wire used has physical properties which are rigidly controlled to produce mesh with maximum weld strength combined with ductility
The steel specifications allow for cold rolled wire with a minimum ultimate tensile strength of **0Mpa and a high resistance to fatigue
Mesh is available in black (pre-galvanised) and galvanised sheets or rolls
Also available on request: Plastic coated and hot dipped (galvanised) mesh
Quality Control
Reinforcing mesh is produced to highest quality standards and complies to ISO ***2. Thorough testing of wire strength, welds and aperture sizes is continuously performed at all stages of the manufacturing process. Final inspections ensure that highest standards are maintained.
Standard Sizes
Reinforcing mesh is available in rolls (*0m x 2, 4m) and sheets (6m x 2, 4m), manufactured according to standard sizes. Wire diameters vary from 3, *5mm to *2mm. Mesh aperture can be as small as **0mm x **0mm.
Special Mesh
Specialized machinery is used to produce weld mesh with non-standard aperture sizes. The spacing of wires in either direction is variable between *5mm and **0mm. Customized mesh is available on request according to specifications provided.
The Reinforcing Mesh Data Sheet
Standard sizes of welded mesh fabric
Specifications: Sheets: 6m x 2, 4m or Rolls: *0m x 2, 4m
Based on SABS ***4/***6 specifications for welded steel fabric for concrete reinforcement