Sell OBD BENZ SBC TOOL

Description

OBD BENZ SBC TOOL

Details: Products, follow these steps:
1 An OBD BENZ SBC TOOL *6PIN connector into the vehicle's OBD**1 communications port;
2 Turn the ignition switch to ON, then OBD BENZ SBC TOOL power light lit, and the device will call and the second tone, said the device is working properly;
3 and then need to restore the maintenance mode switch (*5% **0% **5% ***0% can be selected) at this time there will be frequency BUSY indicator light, and the device will beep tones, *0 seconds to complete data recovery, whichAlways when the BUSY indicator.

 

W**1/R**0 ABS/SBC TOOL(Repair Code C**9F)Mercedes Benz cars have W**1 and R**0 with ABS SBC system , if using DAS test, the instruction as follows:TIPS:CODE C**9F, OPERATION TIME OF COMPONENT A7/3 IS EXCEEDED (SBC HYDRAULIC UNIT)The above tips that show internal fault of control unit, you have to replace the SBC control module and using W**1/R**0 TOOL that can be easily repaired without replace the new control module.

Mercedes Benz's Safety Precautions had stated that before attempting to repair the brake system onits models W**1 (E Class) and R**0 (SL Class), the Sensotronic Brake Control (SBC) system must bedeactivated first using its STAR-DIAGNOSIS tester.Deactivation of the SBC system is absolutely necessary before carrying out any maintenance work onthe brakes like changing of pads, discs and fluids because the system is under a pressure of **0bars. Mechanics who perform brake services on these car models must have the proper tools to avoidthe risk of injuries to themselves and damage to the brake system.Until the introduction of this inexpensive, convenient, light, safe and easy to use SBC tool isanother alternative to the STAR-DIAGNOSIS tester when working on SBC system. It can perform thetasks equally well which is efficient and safety.After the repair had done, the SBC system can be activated and restore back its pressure. The?Error? memory is erased automatically.- Quick, easy operations with LED indications.- Safe to use- Power ON when plugged into vehicle?s OBDII diagnostic connector.- Light, compact and very convenient.- Stand alone unit.This SBC tool works on Mercedes Benz W**1 (E-Class) and R**0 (SL-Class) with SBC systems.It is ideally suited for:- Brake centers- Independent Mercedes Benz workshops- Tire Service centers- Service garages- Quick service centers- Mercedes Benz Specialist centers- Automotive Repair Workshops

Product description:
1  directly through the OBD**1 repair SBC internal computer fault code C**9F, no need to open ABS assembly, convenient and quick fix SBC completed within *0 seconds of data, a key to complete the operation.
2 SBC to repair the data first four models: *5% **0% **0% ***0% user choice.
Support Type:BOSCH NR: 0 **5 **0 **2BOSCH NR: 0 **5 **0 **3BOSCH NR: 0 **5 **0 **5BOSCH NR: 0 **5 **0 **8BOSCH NR: 0 **5 **0 **9BOSCH NR: 0 **5 **0 **0BOSCH NR: 0 **5 **0 **3BOSCH NR: 0 **5 **0 **5BOSCH NR: 0 **5 **0 **8

Product Configuration:
1 Host: 1PCS
2 OBD**1 connector: 1PCS
3 Product Description CD: 1PCS