Description
1. led R7S,China led
R7S,
2. Power:8w led
R7S,
3. Power
optional:5w,8w,*0w,*3w,*5w,
4. Isolated Driver,Rubycon Capicity.
5. Ideal for flood light,replace a halogen **8mm
R7S type lamp,
6, Design dimmable available,
|
Model Number
|
HM-R7S*8W
|
|
Power
|
8W
|
|
Housing Material:
|
Lathe Aluminum
|
|
Input voltage
|
*****5VAC
|
|
LED Quantity:
|
*6PCS
|
|
LED Type:
|
SMD ***0
|
|
Luminous flux
|
******0lm
|
|
Color temperature
|
********0/********0/********0K
|
|
Color rendering index:
|
****0%
|
|
Socket available:
|
R7S
|
|
Frequency:
|
****0HZ
|
|
Size
|
Dia *4 *H **8 (mm)
|
|
Beam Angle:
|
**0°
|
|
Humidity:
|
***5% non-condensing humidity
|
|
Ambient temperature:
|
**0°**0°
|
|
Working Life:
|
****0h
|
|
Net Weight:
|
**0g
|
|
Certificates:
|
CE & ROHS
|
|
Warranty:
|
2 years
|
R7S LED Light Features:
1,Ideal for flood light. Replace a halogen **8mm R7S type
lamp.
2,Extruded aluminum material crust good for heat
dissipation
3,Constant voltage source and constant current source LED
drive
4,NO shadow and shatter-resistant, Beam angle as widely as
**0°,
5,Only *5°C for surface temperature with multiple heat
dissipation
6,High brightness of Epistar SMD, more than*5%
efficiency
7. Easy to install and maintain
8. Long lifespan, low cost of maintenance
R7S LED Light Main Application:
1. Architectural decorative light.
2. Archway, Canopy and bridge edge light.
3. Amusement park, theater and aircraft cabin mood
light.
R7S LED Light Testing
process:
1,We purchase the raw materials of
the R7S LED Lamp from foreign well-known brand suppliers
2,Finished R7S LED Lamp must be made
***0 times on-off test firstly, then go on aging test for *8 hours.
Through these two steps strict test, ensure all the R7S LED Lamp
meet the quality standard.
3,The R7S LED Lamp must be tested
under a series of bad condition, including the highest temperature
**0°C and the lowest temperature **0°C
R7S LED Light Usage Notice:
1,No ballast need, Any ballast should be removed before
installation
2,The R7S Led LAMP is not water-proof
3,The socket temperature peak is *5°C,do not touch the
aluminum or any part while working
