Sell QC11K Numerical--Control Hydraulic Guillotin Shearing Machine

Description

1. The metal sheet is moved easily by the rolling balls and the support block located on the table to ensure the surface quality of the sheet to be cut. There are front support arms and side squaring arm.

2. Closed loop control system is composed of NC controller and the encoder. NC controller has the automatic function of inspection and compensation. The back gauge is driven by DC servo motor, the positioning precision of the back gauge, the parallelism of the sheet to be cut off and the precision of the shear size can be ensured. After inputting precomputed data, the back gauge can be automatically moved, positioned, stopped and retraction when cutting. X axis repeat positioning accuracy: 0. 1mm.

3. Protective fence and the safety interlocker to ensure the operation safety. Power supply switch that is set in the electric box will be automatically turned off when the box's door is opened or the fence is turned up. Protecting barrier with safety interlocker is mounted on the back of the machine. Another, there are travel limit protection and foot pedestal mounted emergency off switch.
shearing machine

4. the back gauge is controlled by E*0 or DA***0 control system

5. it is possible that gap between top and bottom blades could be automatic adjusted through control system.