Description
Wire rope flat elevator cables, Lift cables TVVBG
Approval: CE
Wire rope flat elevator cables application:
As control and signal cable for elevator as well as moving machine
parts, its bending radius is smaller compared with round cables due
to the closely packed shielded cores or bundles. It can be
installed in dry and damp rooms.
Wire rope flat elevator cables Properties:
The outer sheath is extensively resistant to oil and cooling
liquid.
Standards: GB***3.6, IEC******6, EN ****4
Structure:
Conductor: Fine strands of bare copper wire,
Acc. To VDE***5 CLASS5
Insulation: Special PVC
Colour: Yellow, white, orangeg with black number with white digital
coding
Bearing: Steel rope
Outer sheath: Flexible PVC, cold resistance, flame resistance
Colour: Grey(RAL***1)
Technical data:
Rated voltage: **0/**0V
Test voltage: ***0V
Minimum bending radius: 0.3m
Burning vertically test: GB/T****0.*****1
IEC******1.1 **3 test passed
Used under the nomal conditions. The temperature of conductor is
lower than *0ºC
Temperature range: **5ºC to **0ºC
TVVB (Parallel) free suspension length must not exceed *5 meters,
and the lift speed 1.6m/s.
TVVB(interwist) free suspension length must not exceed *0 meters,
and the life speed must not exceed 4m/s.
