AQUAZEEL **1: [Improved membrane performance through reduced scaling]

AQUAZEEL **1 is highly effective in controlling the deposit of inorganic scale.Effectively controls scales including calcium carbonate, calcium sulfate, barium sulfate, strontium sulfate, calcium fluoride, iron, colloidal material, silica and other organic contaminants.
Compatible with most of the membranes.

For Sulphate,Iron & Silica water

Specifications:

pH :2.0 to 7.0 or As per Costumer requirement
Appearance :water white to pale yellow liquid
Solid Content :*5%Min
Density :1.1 to 1.2
Dosing :*0 ppm maximum
Solubility :miscible in all proportion

These formulations are designed to inhibit scale while also dispersing colloidal particles. The inhibition and dispersant properties help extend RO system run times, reduce cleaning frequencies and increase the overall productive life of the RO elements. The application of AQUAZEEL **1 Antisclants may also eliminate the need for acid addition while maintaining desired recovery rates.

Benefits to You Personnel safety (reduced need to handle sulfuric or hydrochloric acid)
Reduced cleaning and maintenance cost
Lower operating cost

Handling

Do not store the material in open, store in cool dark place away from direct sunlight. Keep the container tightly closed when not in use. This product exhibits very low order of oral toxicity. No special care is required in handling this product. Avoid contacts with eyes, skin and food. In case of contact, immediately flush eyes or skin with large amount of water several times. If swallowed drink large amount of water or milk and get medical attention immediately.