Description

 It is effective when sprinkled uniformly over the oxide dross surface. DR*8 will not affect the solder itself or the solderability of the surfaces. Test and field results show that up to *0% of solder can be recovered. It is effective below **0oC. 

Application
For every kg solder dross, it uses*0 - *0 gm DR- *8 recycle powder in minimum *0% recycle rate . This solder dross recycle powder is suitable for wave soldering at the normal working condition and temperature (Lead furnace : **0 C ***0 C, Lead Free furnace : **5 C - **5C ). 
Only to use appropriate tool spreading the DR*8 onto the surface of the solder dross in the furnace, to perform a moderate stirring to ensure effective contact and distribution of the powder, this enable the powder to de-composite and recycle the majority of the solder ion. As the soldering solution surface leaving minor carbonate material, we can clear them off easily.

If you are looking for solder material cost reduction in PCBA wave soldering process, DR*8 will be a good choice for you.

Should you have any enquiry, please feel free to contact us.