Description

 Feature:
ï‚· lead free solder, Environmental protection design;
ï‚· automatic synchronous input board conveyor device, board input is stable
and smooth;
ï‚· Titanium alloy chain and finger
ï‚· Aluminum alloy guide, high strength and hardness;
ï‚· constant pressure flux spray system, it can make spray pressure stable;
ï‚· Automatic flux tracking system: Continuous, back and front spray; spray area
and time are adjusted automatically with PCB width and speed;
ï‚· With double rosin exhaust filter plate (which can be clean), it can reduce
pollution;
ï‚· preheat system: strong hot air system, the hot air from air motor arrives PCB
bottom; it can be pulled out directly which is convenient to clean;
ï‚· it is with heat compensation function after preheating; the temperature cool
down ≤2℃ before putting PCBs;
ï‚· spray wave crest: helix spray design, it can solder SMD component shadow;
ï‚· perfect wave crest: advance wave crest 1 technology, few tin oxidation, wave
crest 2 will make solder pad perfect;
ï‚· double wave crests are stepless frequency motors, they control the height of
wave crest independently;
ï‚· automatic clean finger device: import micro pump, propyl alcohol is cleaning
liquid, automatic cycle to clean machine fingers;
 strong air cool device: cool air is < *0℃; the temperature on PCBs fall down,
cool air will fall down 8℃/sec, no cool air fall down 3℃/sec;
ï‚· Saving energy running: tin wave crest can be up and down with PCBs
automatically, it can reduce tin oxide up to *0%;
ï‚· temperature alarm function (over high or low), automatic tracking PCBs and
counter system;
ï‚· top and bottom controlling, it is very stable;
ï‚· short circuit protection and Over current protection system;
ï‚· Closed loop controlling is in transmission system. Step less adjustable speed
can ensure accuracy time during PCB preheating and soldering;

Model LF**0
Control Panel and PLC
transmission motor 1P AC**0V *0W
transmission speed *******0mm/min
Board width *****0mm（w）
Preheat zone Power consumption：9KW
Length：***0mm
Temperature：（room temperature***0℃）
Preheat IR/Hot air
Tin pot heat *0KW （room temperature***0℃）
Pot capacity **0KG
The height of wave
crest
***2mm
Wave crest motor 3P AC**0V 0.*8KW×2pcs
Cleaning finder pump 1P AC**0V 6W
Cool common air cool/ force air cool
PCB direction L→R(R→L)
Flux capacity 6Litres
Flux air pressure **5BAR
Solder angle **6°
Power supply 3P AC**0V *0HZ
Total power/running
power
*5KW/5KW
Machine size ***0（L）×***0（W）×***0mm（H）
Total size ***0（L）×***0（W）×***0mm（H）
Net weight ***0KG