sell 100M self-adapt media converter (APT-103S34OC)

Description

The Converter have been tested and found to comply with the limits for a class A didtal device,pursuant to part *5 of the FCC xxxxx standards are designed to provide reasonable protection against harmful interference when these devices are operated in a commercial xxxxx devices can use, generate and radiate radio frequency energy and may cause harmful interface to radio communications unless installed in accordance with User’s Guide.Operation of this device in a residential area is likely to cause harmful interface which will make the user responsible for the appropriate remedial action at this expanse. These are class A products In a domestic environment these products may cause radio interface in which cause the user will need to consider adequate preventative menasures. Technical parameter 1.Standards:IEEE**2.3u Fast Ethernet *0/**0Base-TX and **0Base-FX 2.Connectors:(RJ**-UTP and Fiber SC) 3.LED:Power.FDX/Col,FX-Link/Act,TXLink/Act,FX**0,TX**0 4.Data Tranfer Mode: *0/**0Mbps 5.Duplex Mode :Full or Half Duplex Mode 6.Power requirement:AC ******0V *@********************rature:0~*0degree 8.Humidity:5% - *0%(noncondensing) 9.Cable:Cat.5 UTP cable *0.Fiber: Multi-mode *1.Size: *4mm**0mm**6mm (L*W*H) Specification Connector Type: SC Typical Distance: *0Km Fiber Type: singlemode Wavelength: ***0nm Min TX PWR: **0.0dBm Max TX PWR: *3.0dBm Sensitivity: **3.0dBm Link Budget: *3.0dBm