Description
PRODUCT
DESCRIPTION
SUNKAX F*6 Super Strong PU Foam A*6 is a one-component, ready
to use multi-purpose polyurethane foam. It is fitted with a plastic
adaptor head for use with a foam application gun or a straw. The
foam will expand and cure by moisture in the air. It is used for a
wide range of building applications. It is very good for filling
and sealing with excellent mounting capacities, high thermal and
acoustical insulation.
APPLICATIONS
AREAS
Installing, fixing and insulating of door and window
frames.
Filling and sealing of gaps, joint, openings and
cavities.
Connecting of insulation materials and roof
construction.
Bonding and mounting.
Insulating the electrical outlets and water pipes.
Heat preservation, cold and sound insulation.
Packaging purpose, wrap the precious & fragile commodity,
shake-proof and anti-pressure.
PRODUCT
FEATURES
Good adhesion to a wide variety of surfaces such as UPVC,
masonry, brick, block work, glass, steel, aluminum, timber and
other substrates (except PP, PE and Teflon).
Very precise application de to the foam gun system
Application temperature is between**0°c to **0°c
Optimal application temperature is between **0°c to
**0°c
It contains CFC-free propellants which are harmless to the
ozone layer.
STOREAGE & SHLF
LIFE
*2 months in unopened packing store in temperature between
*5°c to **5°c. Keep in cool, shade and well ventilated area. Always
keep the can with the valve pointed upwards
APPLICATIONS:
1. Shake the aerosol can for at least *0seconds.
2. Clean and moisten surfaces with a water sprayer prior to
application.
3. Fit the gun or straw on the adaptor. Firmly screw the can
on the adapter and turn the flow adjustment screw.
4. Fill the holes and cavities approximately *0% as the foam
will expand. Bottom up during application.
5. Foam will be tack-free in about *0 minutes.
6. Excess can be trimmed in about *0 minutes.
SAFETY
RECOMMENDATION:
1. Do not breathe spray/vapor; In case of eye contact, flush
with water and get immediate medical attention;
2. Use in well-ventilated areas;
3. Wear suitable protective clothing, gloves and
goggles;
4. Keep away from direct sunlight and do not expose
temperatures over *0°c;
5. Do not burn or pierce even after use;
6. Keep away from heat, sparks, flames and static
electricity;
7. Turn off sources of ignition (pilot light etc.); Keep out
of the reach of children.
