Description
Structure
characteristics
1.Equipment structure
takes up stainless steel plate plus (****0) power for hull
painting. It not only has good profile, but also has fine corrosion
resistance.
2.It utilizes imported closed-type compressor unit imported from
Europe and USA, which has solid and durable structure and is
endurable and can greatly enhance service property and life of the
equipment; it takes up advanced energy-saving design, which can
save electric power by *0%, save water by *0%, and it uses HFC
refrigerant that will not harm human body and nature, you can
conduct test in safe way;
3.It has advanced and innovative control theory, it integrates
three control systems of PLC, HMI and SOC in fine way. Control is
correct by **0%, and you can experience the novel control feeling;
4.It utilizes most powerful and reliable PLC and special modules in
the industry circle. *0 programs and ***0 steps are provided for
user to make setting/storage and running;
5.It utilizes protection module for safe voltage, the withstand
voltage can reach **0V. After energizing the equipment, the
equipment will not be burned and it can protect the equipment by
**0%.
6.It takes up high-sense FastAIT monitoring and refrigerating
system imported and achieves effective control and management for
refrigerant volume;
8.It has automatic safety protection switch, which has high
sensitivity, can detect any state, cut off protection and give
alarm in shortest time and assure safety of the personnel and
equipment;
7.It utilizes the advanced USB storage device in the industry. It
is the only one for using the USB interface for storing data. It
has not only large storage capacity and fast transmission rate, but
also is portable, has great supporting property and is
convenient.;
8.It can separately raise temperature, reduce temperature, humidify
and dehumidify, it utilizes BTHC flat constant temperature and
humidity regulating mode;
9.The radio tele-monitoring system takes up IPC/SCADA architecture
LAN network interface, it can connect to more than **0 equipments
at the same time, and it can avoid the complex wiring and eliminate
the regional limit;
*0.Large temperature and humidity range: *0~*8%RH, the moisture can
reach within *0%RH after installing the dehumidifying device;
*1.It has air supply and circulating system, which can avoid dead
angle of air flow in the chamber and improve the uniformity degree
of product temperature and humidity.
Control
system:
TEMI**0 touch-key type temperature
and humidity programmable controller
Operating interface: LED display
Temperature and humidity controller: touch-type LED
controllerÂ
Setting mode: touching type
Running mode: setting-up running and programmed running
Program: **0 groups in ***0 sections
Resolution: temperature: ± 0.1 ℃; humidity: ± 1%RH
Input: platinum thermal resistance
Control mode: PID control
Communication function: LAN network interface
Additional function: alarm and display function, power-off
protection function, upper limit temperature alarm function, timing
function (auto startup and auto stop), self-diagnosis function,
curve record and display function, paperless record, USB data
export, tele-monitoring and so on.
It can execute **0 STEP X *0 PATTEM mode.
Each section can be grouped and executed in crossing way.
The execution time for each section can be set up between ****9H
plus *9min.
For setting up for each group, it can circulate within ****9 in
part or entirely for option.
In execution, it can select group circle picture or section
execution picture and can know the remaining time for
execution.
It has power-off function. After power recovery, it can complete
the remained test.
It can select single-section control or multi-section programmable
control.
The screen has backlight time control function and it can adjust
the backlight brightness.
For executing single-section control, it can change the execution
value at will. The memory-type multi-function control has automatic
control output functions, such as heating heater and humidifying
heater for electromechanical solenoid valve for different groups of
refrigerating compressors and so on.
·Water supply
Water supply mode: water lifted by pump
Water supply port: convenient front water supply port
Water storage tank: built-in stainless steel fixed-type water
storage tank (with a volume about *5L)
Safety
device
Humidifier dry-combustion
protection, independent over-temperature protection, water shortage
protection, over-current protection, refrigerant high-pressure
protection switch, over-current circuit breaker, earth leakage
protection and so on.
·Operation ambient temperature: +5~+ *0℃
·Power supply:AC**0±*0%V *0±0.5Hz single-phase double-wire +
protective grounding wire/ AC**0±*0%V *0±0.5Hz three-phase
four-wire+ protective grounding wire
Accessory
1 cable hole (Φ
*0,) cover, 2 sets of shelf, 2 protector tubes, 1 overflow water
tube, 1 copy of operating specification
·Optional accessory:
recorder, tele-monitoring software
Note:
1. The products above can be customized according to demands of the
clients;
2ã€The technical parameters above are the data obtained under room
temperature of *0℃ and non-load condition