Description
ITEM
No: BZP-C*******2
LED panel light Technique
Parameter
|
LEDquantity
|
**8 PCS
|
Luminous Flux
|
*******0 Lm
|
Transform efficient
|
>*6%
|
|
LEDpackaging
|
***8
|
Power factor
|
≥0.7
|
Outer Case Material
|
Aluminium alloy
|
|
Total power
|
*5W
|
Beam Angle
|
**0º
|
PC type
|
Frost
|
|
Input voltage
|
*****5VA
|
Color temprature
|
***0k****0k
|
Outer Case Temperature
|
<*0℃(Ta=*5℃)
|
|
Lifespan
|
>****0H
|
fluorescent lamp
|
Ra>*5
|
Work Temprature
|
**0℃~*0℃
|
|
Power frequence
|
*0/*0 HZ
|
Work humidity
|
*0%**0%
|
Size:
|
**0**5mm
|
Advantages of LED panel
light:
1.Single color & RGB.Can get
fantastic color changing effects.Controlled by dimmer .Colorful
lights and easy for installation.
2.Ultra-thin design
conception.New Dimmer!Unique Dimmer!Has two Kinds Of
dimmer.
3.Energy saving, saving *0% than
the traditional lights at the same brightness.
4.Inner high efficiency (*5%)
heat protection system, with the latest high
efficiency constant currency driver, making the products
can work under unstable voltage.
5.Instant start, no flicking, no
humming.
6.Professional circuit design,
each LED can work separately, thus it can avoid the influence
caused by a broken single LED.
7.Anti-electric wave, no RF
interference.
8.No such hazard as mercury or
lead enters the environment.
9.Long life span, more than
****0 hours
Application of LED panel
light:
Hotels, meeting room, factory
& office, residential, institution buildings, hospital,
schools.Places where energy saving lighting and high color
rendering index lighting are needed.
Installation precautions for
LED panel light:
1.This product should be
installed by trained electricians.
2.Pleas make sure the
transformer and the light panel disconnect with the AC main
supply.
3.The distance between the light
and any flammable materials must not be less than 0.2m.The distance
between the upper part of the installed light and the ceiling must
not be less than 2.0cm.The light must not be installed into
ceilings or walls that contain heat-insulating material.The main
cable must not connect with the low voltage cable or the panel
light.
4.When connecting the wiring
cables to the luminaries, the brown (or black) wire is the Live
wire, connect it with the terminal marked "L".The blue wire is
Naughty wire, connect it with the terminal marked "N".
