Description
1. a
number of patents as technical support.
2. excellent
exposure uniformity: multiple sets of optimal design for the
ultraviolet radiation of professional lenses, optical lenses,
all-round increase in the bonding process requires no grid
irradiation.
3. the
system uses a unique heat dissipation technology and does not
need any fan to cool down it. Rapid cooling can ensure
extended service life of LED, and satisfy the optics and the
electronics industry cleanliness requirements.
4. constant
current mode, intelligent optical mode and some other control
strategies can meet the specialized needs of many industries.
5. a
multi-function system: four light heads(standard)of LED light
source can be individually controlled, for the four stations
simultaneously without affecting each other. The original method
requires four conventional mercury lamps curing unit of production
control situations, respectively. But now it only uses a
four-channel LED curing unit which can fully solve the problem. It
fully reduces the early stage of investment of UV irradiation
equipment factory. We also developed a host 5,6,8,*0,*2 a light
head with program module to meet high demand of customers.
6. advanced
solutions to achieve the LED light head automatic calibration
memory function, to ensure the consistency of all the exposure
head, interchangeable. Traditional mercury UV curing equipment
means bad light speed, individual differences, and each lamp light
intensity decay rate is inconsistent, affecting production of the
product quality. And some quality problems can be found after
leaving the factory, which will seriously affect the credibility of
the enterprises.
7. the
system has an RS***2 communication interface and it is easy to copy
and upload the data.
8. the
start/stop illumination can be controlled by footswitch or external
I/O interface and it is easy for centralized control.
9. the
fiber is very easy to be damaged if irradiating in the traditional
lamp way; and the maintenance costs can be too high. However, the
LED illumination head and the controller are connected by a
dedicated cable, its bend redius is 1/3 the bend radius of fiber,
so it’s difficult to damage, and even no maintenance costs.
