Hot Facial steamer machine

Description

General introduction:

    This facial steamer is used to clean the skin thoroughly by opening the pores in order to remove impurities (such as blackheads, whiteheads, make up, etc.) and generally revitalize the skin. 

 

Operations:

Adjust the height of steamer. Avoid bumping the equipment.

1.Fill the glass jar with distill water only through water funnel, do not exceed the red warning line.  Make sure the jar is attached firmly and perfectly to the steamer.

2.Connect power plug. Turn power on, power indicator should light up.  Steam will come out within ****5 minutes after the power is switched on.

3.Turn ozone on only when steam comes out.  Ozone indicator should light up.  Do not turn ozone on when there is no steam.

4.Position steam jet to aim at clients chin and steam should move over his/her entire face.

5. Turn off ozone first, and then power when finishing.

6. Unplug power socket and wait till the glass is cool before removing it from the machine.

7. To stop steaming during operation,please turn off power and ozone switches.

8.For safety purpose, the machine will shut off automatically when water level is below the heating element.

 

Cleaning instructions for facial steamer:

1.Glass jar and heat element should be cleaned at least once a week with distill water.

2.Clean residues from heating element by using clean distill water and soft cloth.  Do not use any metal or abrasives materials for cleansing.

3.Do not lose the rubber band on top of the glass jar.  It is used to prevent water spilling out.