Description
Roll forming main
machine
1: Coil width:
***0mm effective width: ***0mm
2: working speed:
*2m—*5m/min (not contain cutting)
3: roll station:
*0stations
4: material of roller:
*5＃forge steel, polished and coated
with chrome
5:material of main
shaft:*5﹟forge steel
diameter
roller:Ф*6mm
6: main power:
5.5kw
7: forming thickness:
0.4mm—0.8mm pre-coated steel and galvanized
steel
8: Transmission: by
single line 1.2 inch Chains
9: size of machine:
about****0 x ***0 x***0 (L x W x H)
*0: weight: about
***0Kgs
*1: color: blue and
yellow (it is also can changed depend on customer
request)
*2: Cutting:
(1)
Flat-sheet cutting (manual pre-cutting): It is used when changing
the coil of raw material; it can cut the coil rapidly and
time-saving.
(2)
Cutting after forming: Cut the sheet after roll forming to required
length
(3)
Cutting motion: The main machine automatically stops and the
cutting will take place. After the cutting, the main machine will
automatically start.
(4)
Material of blade: CR*2with heat treatment
(5) Length
measuring: Automatic length measuring
(6)
Tolerance of length: 3m+/- 1.5mm
