Description
Drop pressure Improve
efficiency and performance
(1)In nominal working pressure,
when initial pressure during 0.7Mpa*1.0Mpa, oil seperator's initial
pressure difference can be controled between
0.*5bar*0.*5bar.
（2）Compressed air oil
content can be controled between **6ppm.
（3）Compressed air oil
mist grain can be controled 0.1μm below.
Filter material selection and
production process
（1）The filter element
select superfine glass fiber from USA HV and Lydall
corporation.
（2）Fine welding , spot
welding and the newest research and devlopment double component
adhesive ensure that oil seperator have higher mechanical strength
and can work under **0°C high temperature .
（3）Fog shape oil-air
mixture of compressed air can be filtered
completely.
Service life
（1）The service life is
about ***0h****0h ,
（2）The life length is
decided by factors:oil seperator tank's design,routine maintenance,
environment cleanliness, quality of oil, operating temperature and
quality of oil seperator.
Here are some notes
:
（1）According to
performance of air compressor and oil separator tank's size choose
oil seperator filter element;
（2）Oil seperator tank
should set position of oil , which setting 1/**2/3 position at
looking glass;
（3）Secondary return
pipe and holding valve should be kept open and the exhaust pressure
should be adjusted to the specified data;
（4）Insure operating
temperature and pressure maintenance valve of air compressor
working normally, under specified data.
（5）The oil seperator
is suitable for all type ordinary oil, mineral oil, synthetic oil
and half synthetic
