FOB Price
Get Latest Price( Negotiable )
|Minimum Order
Place of Origin:
Cuimiao town Xingyang city Henan prvince
Price for Minimum Order:
-
Minimum Order Quantity:
1 Piece
Packaging Detail:
nude packing, and the parts are put in wooden case
Delivery Time:
25 days
Supplying Ability:
20 Piece per Month
Payment Type:
T/T, L/C
連絡先担当者 Ms. Annie
Cuimiao, Zhengzhou, Henan
1.1 Application and Usage:
1.1.1 This series of crushers can be used in metallurgical industry, mining
industry, chemical industry, building material, highway, railway, water industry
and etc. They can be used to crush all kinds of mine and other massive
materials into the granule, for the secondary crushing and the fine crushing.
1.1.2 The highest anti-pressure strength of crushed material is **0/Mpa
1.1.3 The size of crushed material should conform to the stipulation in the
table of Specification.
1.1.4 Too sticky material will affect the capacity of the machine.
1.2 Working Principle
Jaw Crusher mainly consists of main frame, eccentric shaft, belt wheel,
flying wheel, movable jaw plate, side board, toggle plate, back seat for
toggle plate; gap adjusting screw, returning spring, fixed jaw plate,
movable jaw plate and so on. The toggle plate also plays the role of
protecting.
The Crushing form of this series Jaw Crusher is driven-squeezing style. Its working principle is: Motor drives belt and belt pulley,
makes moving jaw up and down through eccentric shaft. When the
moving jaw is up, the angle between lining plate and moving jaw
becomes large, and this will push moving jaw plate close to the fixed
jaw plate. During this process, the material is crushed and ground, thus
the crushing will be done. When the moving jaw is down, the angle
between lining plate and moving jaw becomes small, the moving jaw
plate will leave the fixed jaw plate on account of the effect of pulling bar
and spring, and then the crushed material will be discharged from the
lower opening of the crushing room. With the motor continuously
rotating and the material periodically crushed and discharged by the
crusher, the mass production can be realized.