Description
Introduction;
FB
dual-idler electronic belt scale, absorbing
Germany Schenk technology, is installed under the belt conveyor to
make continuous weighing for conveying material. It is highly
precise, reliable and can meet the requirements of many harsh
environments. It can be widely used in building materials,
chemicals, coal, ports, ceramics, food and other industries.
Product Features:
1.FB-DMC**1A intelligent
controller is adopted;
2.AChieve dynamic and continuous measuring;
3.Reasonable structure, stable and reliable measurement;
4.Automatically perform zero measurement and system
calibration;
5.The control instrument can display instantaneous flow rate, total
accumulation and can also transmit signal at the same time;
6.Can achieve continuous batch feeding;
7.With the function of over-load alarm;
8.Set all kinds of parameters, and adjust the system in best
control conditions;
9.Can save electric-shock date permanently;
*0.Self-diagnosis function and can be connected to DCS system
Working principle:
When the material on the
belt conveyor passes through the belt scale, the load cell detects
the material weight and generates a signal in proportion to the
material weight. The weight signal is transmitted to the
controller. At the same time, the speed sensor installed under the
scale detects the belt speed and generates a signal which is also
transmitted to the controller. By multiplying the weight signal and
the speed signal, the instantaneous flow rate and total
accumulation can be calculated.
Parameters;
Weighing
range: 0.1~***0t/h
Weighing mode: Dual-idler
Weighing Accuracy:±1%
Maximum angle of inclination:*0 degree
System power:AC**0V± *0% *0 Hz ± 2%
