Sell Eco Almighty resin TFL-330

Description

Eco Almighty resinTFL***0

Introduction:This product is dedicated to achieve the effect of cat-beard. Suitable for creases or folds and three-dimensional whiskers in denims. It has the features that setting fast, three-dimensional feel, good effect. And the cloth formaldehyde residues﹤*5ppm, accord to the latest international standards and export environmental requirements.

Specification:       

Appearance: Transparent viscous liquid

          Ionic character: Non-ionic

          PH value: 5.**5.2

          Solubility: Can be dissolve with water at any ratio in room temperature.

Direction for usage:

(1) Formula: Almighty Resin TFL***0 ****5%; water *5%**5%

(2) Curing temperature: **5℃－**5℃; Time: ****5min

Process

Soaking in solution: combined with liquid soap in proportion and mixing evenly. Put the pants into the liquid soap and soaking for *0 minutes, then dehydration and oven dry until the pants is *0% of dry. Please note that the dosage of Almighty Resin is base on fabric, when treated the thin or elastic fabric, the dosage should be decrease accordingly.

Setting: steam the parts which need to achieve cat-beard effect till slightly moist, make a cat-beard shape base on the template, then steam to on the part of cat-beard shape till it get stiffening.

Curing: The purpose of curing is give full play to sizing feature of resin, but the premise is not curing a bad pants, this requires customers to do experiments according to different fabrics. In general, the thick fabric and normal fabric should curing at temperature of **5℃ for ****5min, the thin or elastic fabric should be curing at temperature of **0℃***5℃ for *5min. When the pants discharge from the oven, if the cat-beard effect is not stiffen enough or the three-dimensional effect is not ideal, you can heat for 5 minutes additional at the previous temperature.

Storage & Package:

Can be stored for 4 months under cool and shady conditions.

**5 or **0Kg per plastic drum.