Sell Measuring principles for point level detection / level switch

Description

Fundamental Principles

The SU-YC  Vibrating Probe Level Switch/liquid level control switch  is a kind of universal liquid level switch, which is brought to its resonance frequency by means of piezoelectric crystals drive. If the tuning fork is covered by liquid or solidity, this frequency will change. The electronics of the SU-YC monitor the resonance frequency and then output a switching value, in this way, to alarm and control the liquid level.

The structure and characteristics of tuning fork liquid level switch make it can replace any level switch of other principles, and can be widely used in building materials, petroleum, chemical industry, light industry, metallurgy field to alarm or control the height of liquid level for their lower and upper limit.

Qualification

Power Supply:                      AC **0V/AC **0V *0Hz / DC *4V

Operating Temperature:         Fork: ******0°C

                                           Instrument:*****0°C

Operating Pressure:              ≤2MPa

Fluid Density:                       0.6g/cm3 (in minimum)

Action Point:                         Vertically insert into water about *5mm

Start up Time:                       about 3 sec

Response Time:                    about 1 sec

Output Style:                         One or two sets of relay contact (AC **0V/3A, DC *0V/ 3A)

Output Delay Time:                ***0sec, can be adjusted

Sensitivity:                             *0 grades can be set

Consumption:                         ≤1W

Process Connection:               R 1 Taper Pipe Thread or others.

Explosion Proof:                      Exd II CT6