Description
Main Parts:
1. Main Reactor
2. Desulfurization
Deduster
3. Water Film
Deduster
4. Gas-water
Separator
5. Secondary Setting
Tank
6. Electronic Control
Cabinet
7. Waste Gas Recycling
System
8. Condensing
System
9. Oil Tank
*0. Chimney
*1. Furnace
*2. Tapping System
(automatically )
*3. Draft fan
*4. Blower
*5. Waste Gas Combustion
System
*6. Some Other Related
Pipes
*7. Safety
Valves
*8. Temperature and Pressure
Meters
CHARATERISTICS OF WASTE TYRE
REFINING EQUIPMENT
1.Domestic pioneer of this technology
:
a.
In its key installment decomposition processor design, has
thoroughly overcome the disadvantages of the domestic present
vertical flat base split processor, such as bottom partial being
heated non-uniformity, easy to break, low output, short
service-life is short and so on, the main engine uses
horizontal-type **0ostructure*0.4 R/M
b.
Fast practical feed-in and discharge system. The highest feed-in
quantity every *4 hour achieved ***0tuns for each equipment.
c.
Highly effectively gas heating system. In the process of refining
oil, after the gas is heated up to **0 , it will produce a large
amount of unliquefied gas-CH4& C4H8 , which cant be formed at
normal temperature, normal pressure. If those gases have been
fully burning by the specific designed gas nozzle, they can produce
a great amount of energy and economize resources.
d.
Flue dust catcher system. It matches the bidirectional water impact
type tornado dust removal room, and the rate of the flue dust catch
is access than *5% .
