Description
Technological process(autoclaved aerated concrete
machine):
1. The raw material is stored in the material storehouse,
after according to the automatic batcher then enter into the
pouring mixer.
2. Pour and enter to the mould after mixing evenly.
3. After precuring a certain temperature for a period of time,
the base body reach a certain of hardness, the mould and base body
are hung to the cutting machine by the sling.
The sling is fulfill the following functions:
1)Titling the mould *0°in the air(one side plateof the mould
become the bottom to support the base body ubtil the finished
product is steamed).
2)Hanged to the cart or the cutting support to open mould or
demoulding.
3)The demoulded frame and returned side plate shall be
reorganized into the mould and shall be ready for nest pouring
after cleaning and oil spraying.
4. The base body then be cut on the cutting machine in six
sides:
1)The base body carries on the side and cuts and mills the
trough vertically.
2)Then carry on the vertical level to cut.
3)Cut horizontally finally.
5. The base body which is cut and the bottom are hanged to the
steam-pushing car by the semi-product sling, then fed into the
autoclave in groupe to be steamed under high temperature.
6. After a period of steaming, then leave the autoclave and is
hanged by the sling. The hardening plates arereturned.
We can supply our customer for designing, production,
installation, commissioning, training and good after-sales
service.
If you are interested in autoclaved aerated concrete machine,
please feel free to contact us.
Further information, please feel free to contact with
me.
Thanks
