Description
Product Line Overview
The WXSG Thin-section Bearings consists of 7 open
and 5 sealed series, bore diameters ranging from 1.**0 inch to
*0.**0 inch. Series range from 0.***5 X 0.***5 inch to 1.**0 X
1.**0 inch in cross section. In these series, the material of rings
could be GCr*5 and stainless continuous ring " snap-over " pocket,
brass or stainless steel continuous ring circular pocket, toroid
(Nylon), and steel spacer balls separators.
To support various load
scenarios, WXSG thin section bearings are available in three basic
types: radial contact ( Type L), angular contact (type M) and
four-point contact (Type N). Open bearings are available in three
configurations: Type L, Type M, Type N. And Sealed bearings
are available Type L & N, You could choose sealed bearings for
applications where bearings need to be kept clean and well
lubricated
Specialty:
Difference between Thin Section
Bearings and Standard bearings is the cross section dimension were
designed to be single, the cross section bearings and standard
dimension is unchangeable in a series. It won’t increase with
enhance of bore diameter. Therefore, this kinds of thin section
bearings were called uniform cross section thin-section bearings.
By using the same series of WXSG thin-section bearings throughout a
products line, the designer could standardize on common
components.
WXSG thin-section bearings were
designed to save space, lower the overall weight of your designs,
dramatically reduce friction, and provide excellent running
accuracy. With WXSG thin-section bearings you could downsize your
design and cut manufacturing costs, without sacrificing bearing
performance or life.
