Description

CE marked upper arm blood pressure meter

I. General Information

1.1 Intended Use

Jumper Arm Automatic Blood Pressure Meter is intended for use by medical professionals or at home to monitor and display diastolic, systolic blood pressure and pulse rate on adult each time, with an air cuff buckled around one's arm according to the instruction in the user's guide manual.

1.2 Specification

Product Name: Arm Automatic Blood Pressure Meter

Applied Models: JPD***0A & JPD***0A-V

Measurement Principle: Oscillography

Cuff size: **0mm×**0mm (+/*5mm), (*8.5 ×5.1) inch (+/*0.2inch)

Measurable Wrist Circumference Range: **0~**0mm (8.6~*2.6inch)

Measurement Range Pressure: *0~**0mmHg   Pulse: *0~**0 times/minute

Accuracy  Pressure: ±5mmHg, Pulse: ±5%

Power Supply: 6V DC (4 “AA” batteries)

Battery Life: Approx. **0times(**0mmHg, 1 time/day,*2°C(*1.6°F))

Working Environment Temperature: 5~*0°C (*1°F~**4°F)

Humidity: < *5%RH

Storage Environment Temperature: **0~*0°C (*4~**0°F)

Humidity: < *5%RH

Safety Classification: Type B Equipment

Memory Capacity: 2 X *0 sets of data including date and time

Inflation: Automatic Inflation by internal pump

Deflation: Automatic speed deflation system controlled by internal electromagnetic valve.

Display Pressure, Pulse, Date, Time

Buttons: 3(ON/OFF, Memory, SET)

Size: **5mm (5.3inch)*****-(L)

*6mm (3.7inch) *****-(W)

*6mm (2.2inch) ******-(H)

Weight: **1g (0.5 LB)

1.3 Contraindications:

1. Heart disease

2. High blood pressure or other circulatory disease

3. Arm injury

Warning:

The device is intended to be used by adults.

DO NOT use this device on infants.

2. Name of Each Part

                                      Figure 1 – Appearance

                                   Figure 2 – Display of LCD

After your body is in a comfortable position, press the “ON/OFF” button. The device will verify itself and LCD will twinkle automatically.

After about two seconds, LCD shows one “*0”.

After measurement, the result of systolic, diastolic and pulse rate will be all displayed on LCD. The result will be automatically memorized by itself.

Press “ON/OFF” button after measuring, the device will be turned off.

The device will be automatically power off after 1 minute of none use.