FOB Price
Get Latest Price1000 ~ 1200 / Metric Ton ( Negotiable )
|Minimum Order
Place of Origin:
China
Price for Minimum Order:
Minimum Order Quantity:
10 Metric Ton
Packaging Detail:
25/50kg pp bags or as customer's request
Delivery Time:
Within 15-20days after accept the payment
Supplying Ability:
10 Metric Ton per Month
Payment Type:
Western Union, T/T
連絡先担当者 Ms. Anna
No 75 Chongqing Road Innan Economic Development Area, Lanzhou, Gansu
Raw material high density polyethylene PE
blown
film Grade, injection molding/extrusion pipe
1.Good
quality, prompt delivery
2.film
grade, blow/injection grade
3.Big
quantity, competitive price
4.Packing: *5kg/ pp bag
5.Loaded: *0MT/*0'ft
6.Price available time: within *0 days
7.Delivery:within *5 days after receiving deposit.
LDPE Injection Grade
Tests |
Value |
Unit |
Melt Flow Rate (MFR) |
*5 |
g/*0min |
Density |
0.**2 |
g/cm3 |
Tensile Yield Strength |
7 |
Mpa |
Elongation at Break |
*5 |
% |
Wien Softening Point |
*5 |
°C |
Packing |
In *5 kg PP woven bags,*0MT/*0’FCL |
LDPE film grade
Tests |
Value |
Unit |
Melt Flow Rate (MFR) |
2 |
g/*0min |
Density |
0.***5 |
g/cm3 |
Tensile Strength |
9 |
Mpa |
Elongation at Break |
**0 |
% |
Fish eye max(0.**2mm) |
*0 |
n/***0cm2 |
Stripes |
*0 |
cm/*0m3 |
Packing |
In *5 kg PP woven bags,*0MT/*0’FCL |
Specification:
Make barrel, plastic bottle and bag, make all kind of pipes, make shading net, and make cable wire-insulating.
HDPE
cable material |
Unit |
|
Mass density |
g/cm 3 |
0.****0.**9 |
Melt flow Rate(**0 centidegree /2.*6kg) |
g/*0min |
≤1.0 |
Tensile yield strength |
MPa |
≥*9.0 |
Flexural modulus |
Mpa |
≥**5 |
|
% |
≥**0 |
Impact Embrittlement temperature |
centidegree |
MAX ***8 |
Dielectric Constant |
**0KHZ |
2.*2 |
1MHZ |
2.*1 |
|
Loss Tangent |
**0KHZ |
MAX 0.***1 |
1MHZ |
MAX 0.***1 |
|
Volume resistivity |
OHM-CM |
MIN 1x*0 *5 |
Application |
|
Application:
Filler
for Polyethylene Film and Blow Moulding applications.
Cost
reduction is essential for PE film blowers around the world in a
market that becomes more competitive every year. We offer several
products for the blown film process. PE*2 is Calcium carbonate as
opaque filler is offered on LLDPE compatible carrier.
Blow
moulded bottles and container cost can be reduced by the addition
of our products.
Application Advantages
1,
Reduce cost efficiently and increase output.
2, PE*2 is
easy to disperse, stable quality.
3,
Reduce the use of white master batch,
4, The
small average particle size of the calcium carbonate gives the film
a smooth surface.
5,
Environment protection.
6, The
controlled maximum particle size allows you to run longer between
screen changes.