Description

1ton energy-conservation medium frequency induction furnace

(aluminum shell with machine tilting,two furnace body)

1.Model number:rated capacity of furnace 1t,rated power of medium frequency supply **0KW.

2.Complete set supply range:furnace body 2set,furnace tilting device2set,water cooling cable (4.5m) 8set, medium frequency supply cabinet 1set, capacitor cabinet (open type) 1set, low voltage control cabinet 1set, water bank of furnace body 1set, water bank of supply source 1set, water bank of capacitor cabinet 1set, Dumping furnace transmission 1set, crucible mold 1set. Spare parts of equipment: master control board 1piece, KK tube 1piece,KP tube 1piece.

3.Technical specification:*-phase incoming voltage of medium frequency supply source **0V, output voltage of medium frequency supply **0V. Rated power **0KW, frequency *0HZ. Furnace foreign Φ***0, diameter Φ***0, high ***0.Inductor inner diameter Φ**0, pillar height**0.

4.Fit out components:silicon-controlled rectifier (SCR) for KP tube ***0A/***0V;KK tube ***0A/***0V (connecting in series-parallel). Breaker of the low voltage control cabinet ***0V/***0A. Capacity of compensate capacitor ***0kilovar.

5.Furnace tilting type: reducer drive, **1 reducer drive, trustiness, facility.

6.Master control board:The control circuit used one single master control board, it designed to be whole, and reduced connecting line greatly, fixed reliability, so avoided safe failure. This control circuit board is high degree of integration, the αangle automatic adjusted especially, that let power output of the equipment always was on constant condition, and electric power can be saved over 3% in comparison with same kind product. Safe start-up and automatic frequency-sweep.

7.Customer service: Free debugging (at home), all the costs of seller’s experts go and work at abroad for return air tickets, accommodation and meals, will be borne by the buyer. The debugging period is 7 days, overstep the set time the buyer shall compensate the experts at USD **0 per day for delaying time. The seller should be responsible for the scene testing; After normal melting the seller should be responsible to guarantee repair or change of the faulty components in 6 months, such as compensate capacitor,hydraulic device,breaker,and furnace shell (Furnace leak wear steel, power less water, a sudden power failure caused by supply-side problem is not responsible for).

8.Team of payment:Buyer pay *0% of full value in advance, *0% payment before shipment.

9.Transformer prepare by buyer !

Packing by 1 X *0’ container