Sell Multifunction Emergency Jump Starter

Description

Operation Guidance of Jump Starter: When charging, the indicator lights will flach one by one. The number of solid indicator lights indicates the battery capacity of Jump Starter. Full indicator lights are solid when charging is pause or complete.     1, Select the appropriate voltage and connector for the electronic device to charge / power supply
2, Press the switch to start charging; If you unplug the cable, auto-sleep will start in one minute.
3, Five lights will flash circularly during the charging and all lights will keep bright when your device is full-charged
4, During the charging for your device, LED lights indicate the balance power of built-in battery. Four lights indicate *0% balance, three lights indicate *0% balance, two lights indicate *0% balance and one light indicates *0% balance. The built-in battery is empty whenall LED lights start to flash
5, Press the switch 3 seconds to start If you want to use LED illumination and then 4 modes of LED light appear in sequence( light, strobe, SOS, close) by pressing the switch to transform.
6, Store the product in a cool and dry place and away direct sunlight.
Special note:
To start *2V car, please make sure at least two LED lights are bright firstly, then connect the red battery clip to the battery positive (+) and black clip to the battery negative (-) and insert the plug into the jump start socket, finally turn the ignition switch to the START position. Once the car is started, please disconnect the plug and remove the battery clips immediately(within *0 seconds).