Description

PET bottle recycling machine/line 
1. Bale opener 1Set. Open the baled PET bottles into individual bottles, controlled by inverter 
2. Small manual sorting belt 1 set.Simply pick out the steel wires, films or other big impurities. 
3. Belt conveyor 1 Set. Delivery bottles to the water label remover machine. 
4. Water label remover machine 1 Set. Peeling the *0% labels and *0% caps of the bottles, washing the bottles by cold water. Clean bottles will be convenient for manual sorting and it will be more efficient to increase the capacity of the crusher. 
5. Manual sorting belt 1Set .The belt length is 6 m, the workers separate different color bottles and non-PET materials. It's equipped with metal detector. 
6. Crusher 1 set or 2 set.This crusher is designed for wet crushing. Crusher is supplied with standard grid size of *2mm and spare grid of *0 mm(Custom made). 
7. Screw conveyor 1 set. Transport flakes to the hot washing. 
8. Hot water washing chamber 1 set or 2 set. Washing the flakes from labels, dirt and other residues by water heated to *5 ° C. Overflow on top of washing chamber, remove cups and rest of the paper. The water heated by steam from steam boiler, or burn the water directly from the bottom by oil or gas. 
9. Friction washing tank 1Set .The flakes are efficiently cleaned insight in drum with blades on rotor turning 1, **0RPM. Flakes are rubbing against each other as well as against the rotating auger. The auger moves the flakes forward and clean last remains of dirt. 
*0. Floating washing tank 2 Set. Flotation/sink tank separate the material according to their density. PET sinks to the bottom and is discharged by a screw conveyor. Remains of caps and rings made of PE and labels of PP float on the top and are moved by rotating shovels to side of washing tank. Small screw conveyor takes them out. 
*1. Centrifugal dryer 1Set .The wet flakes are dewatered in horizontal centrifuge. Flakes are dry to 2.5% of humidity. 
*2. Drying bunker 1Set. Drying the flakes by electricity of *1kw, ***0L storage silo has fan blower conveyor filling station to the big bags 
*3. Electrical control systems 1 Set .Whole line is controlled via two main control boxes and two panels. Switch to each machine on the panel, plus frequency control display.
*4. Water sewage plant: Complete water sewage plant to Recycle and reclaim of sludge Capacity: (Bottles in) **0kg/hr, 1, **0kg/hr and 2, **0kg/hr, ***0kg/hr Moisture of final flakes: Less than 1.5%. 
Plastic PET washing line Working stages: 
Unpacking and cutting **-> belt conveyor**-> cap and label removing **-> crushing **-> washing under hight temperature **-> precipitation and risning **-> drying **-> dehydrating **-> final products 
Input: Whole waste PET bottle 
Output: Cleaning bottle flake. 
Come up to standard conmintation rate < 1% wate rate **2% high automatic: Three persons operate the whole line.

Aslo it's our suggestion,all the machine can be selected by your producting capacity.