Description
Introduction:
Coated Alkali-resistant fiberglass mesh cloth is based on C-glass
or E-glass woven cloth and treated by alkali-resistance copolymer
resin on the surface. The woven cloth is made of fiberglass yarn or
roving by means of leno or plain weave. The diameter of elementary
fiberglass varies between 9 and *5 micron. The resin used for the
surface treatment ensures the property of alkali-resistance and
increases the mechanical durability that is required by the
construction industry.
Application:
1. External Thermo Insulating Composite System (ETICS) &
External Insulating Finish System (EIFS)
2. External and internal plaster reinforcement
3. Electrical heating mats
4. Marble Slab Reinforcement / Mosaic Carrier
5. Asphalt reinforcement (roof water-proof)
6. Reinforced lightweight construction boards
Packing and Storage：
Packing:
Coated Alkali-Resistant Fiberglass Mesh Cloth is wound on paper
tubes with inner diameters of *8, *0.8, *6 or **2 mm. The quantity
of fabric wound on the tube is determined by customer requirements
and varies from just *0 meters to the thousands of meters needed
for a machine processing. Fiberglass Mesh Cloth is offered in
widths of between *0 cm and **0 cm in addition to the standard **0
cm. Each roll is wrapped in a shrink film or plastic bag. Then
rolls are packed into cartons or pallets.
Storage:
Store rolls in a cool, dry location
Store away from the direct contact with ground or concrete
Store out of direct sunlight
Protect rolls from weather and other damage
