FOB Price
Get Latest Price1600 / Ton
|Minimum Order
Place of Origin:
China
Price for Minimum Order:
Minimum Order Quantity:
20 Metric Ton
Packaging Detail:
in 26 Kg Bags, 18mts in 20`FCL
Delivery Time:
Within 15-20days after accept the payment
Supplying Ability:
1000 Metric Ton per Month
Payment Type:
T/T, L/C, Western Union
連絡先担当者 Ms. Anna
No 75 Chongqing Road Innan Economic Development Area, Lanzhou, Gansu
1.Products properties of vrigin pe granule
High density polyethylene for non-toxic, tasteless, no smelly white particles, melting point is about **0 °C, relative density of 0.**1 ~ 0.**0. It has good heat resistance and cold resistance, chemical stability, but also has high rigidity and toughness, good mechanical strength. Dielectric properties, environmental stress cracking resistance sex also is good.
2. Application of vrigin pe granule:
Make barrela, plastic bottle and bag, make all kind of pipes, make shading net, and make cable wire-insulating
3. Storage of vrigin pe granule:
Shelf life: It should avoid damp, contaminated and direct sun light during transport.And should be stored in ventilated and dry place. Do not put it with flammable and corrosive substances together,and away from the fire.
4.Specification for example
Film grade
|
Item |
Test condition |
Test Method |
Value |
|
Density (g/cm3) |
ISO ***3 |
0.****0.**5 |
|
|
MFR (g/*0min) |
**0°C/2.*6kg |
ISO ***3 |
0.***0.*7 |
|
Tensile strength at yield(Mpa) |
ISO ****2 |
*2 |
|
|
Elongation at break(%) |
ISO ****2 |
>**0 |
|
|
ESCR (h) |
F*0,*0°C,**0% |
ASTM D****3A |
***0 |
|
VICAT( °C ) |
ASTM D****5 |
**6 |
Blow grade
|
Item |
Test Condition |
Test Method |
Value |
|
Density (g/cm) |
ISO ***3 |
0.**0~0.**5 |
|
|
MFR (g/*0min) |
**0°C/2.*6kg |
ISO ***3 |
1.7~2.5 |
|
Tensile strength at yield (Mpa) |
ISO ****2 |
*4 |
|
|
Elongation at break(%) |
ISO ****2 |
>**0 |
Injection grade
|
Item |
Test Condition |
Test Method |
Value |
|
MFR (g/*0min) |
**0°C/2.*6kg |
ASTM D****8 |
*0 |
|
Density (g/cm3) |
**- |
ASTM D***2 |
0.**4 |
|
Tensile strength at yiled(Mpa) |
**- |
ASTM D***8 |
*8 |
|
Elongation at break(%) |
**- |
ASTM D***8 |
**0 |
|
Impact tensile strength (kJ/m2) |
**- |
ASTM D****2 |
*2 |
|
ESCR |
ASTM D****3 |
3 |
|
|
VACIT(°C ) |
**- |
ASTM D****5 |
**7 |
