Sell KR-DJ Electrolytic Etching and Remove Film Machine Technical Para

KR-DJ  Electrolytic Etching and Remove Film Machine Technical Parameter

(1) Feeding Width: ***0mm 

(2) Outline Dimension: ≈ ****0mm (length) × ***0mm (width) × ***0mm (H)

(3) Total Power: **0KW (machine-power *0KW, etching power **0KW)

(4) The Main Drive Motor: 2.2KW; ***0r/min; Frequency

(5) Brush Roll Gear Motor: 0.*5KW ***0 r / min Ratio: 1:*7

(6) Electric Heating: remove film area 5KW (stainless steel)

(7) Etching Area Titanium Pump: The power is custom-built

(8) Etch Area Cleaning Titanium Pump: The power is custom-built

(9) Remove Film Section Stainless Steel Pumps: The power is custom-built  

(*0) Remove Film Area Stainless Steel Wash Pump: The power is custom-built

(*1) Etching Area Length: ***0mm 

(*2) Transmission Speed: 0 ~ 4m/min continuously adjustable 

(*3) Working Voltage: AC **0V three-phase four-wire system 

(*4) Temperature Control :0 - *5 ? 

(*5) Yields :******0 / 8h 

(*6) Etch Depth :****5 wire   Equipment Description Etching Area:   

 * Use high-quality carbon electrode processed.    * Use high-quality *0mm wide and 8mm thick copper connections.    * Use imported titanium pump, TECO inverter motor. Transmission speed can be  more precise and stable.    * Main drive is double-sided drive, main drive rods for the *4 × *4 titanium rods to make transmission more smoothly.    * Built-in groups of water-blocking roller. The sea using high-quality rubber roller rubber. To extend their useful life.  Etch cleaning areas:    *there are two sets of water-blocking in front and behind , so that it is completely separated from the etching area .    * Pressure spraying, so it can wash more cleaner.  Remove film area:    *In the Remove film area the feeding rod is made in stainless steel rod, to extend the useful life of the feeding rod.    * Intermediate set brush roller, remove the film more cleaner, to ensure the quality of removing film.  Neutralization District: acid-base neutralization.  The cleaning area after removing the film:    * two completely cleaning area. Ensure more cleaner .    * there are two sets of water-blocking rollers in front and behind , to ensure no water can enter from this part to that part.  Dry area: dry area will adopt the authoritarian ? **0 absorbent sponge roller, can absorb the excess moisture from the workpiece surface.  Air-dry areas: use the 3KW cooling machine, so that the workpiece plate can be completely dried.   Function The principle of electrolysis? fix the required pattern formed in the workpiece plate, and then remove the film  for cleansing and dried, the finished plates come out.