FOB Price
Get Latest Price50 ~ 60 / Piece ( Negotiable )
|Minimum Order
Place of Origin:
ningbo cixi
Price for Minimum Order:
Minimum Order Quantity:
1 Piece
Packaging Detail:
1pc/box, 2pc/ctn
Delivery Time:
20days
Supplying Ability:
2000 Piece per Month
Payment Type:
T/T, Western Union, Money Gram
連絡先担当者 wilson
325, Ningbo, Zhejiang
|
•
**4stainless steel one-piece cover with satin finish1mm thick.
Cover fixed to the base by means of 2 vandal-proof lock screws and
lock with special L wrench. • Base in aluminium, 3 mm thick, with 4 Ø 8 mm holes for wall mounting. • Fire resistant plastic **-VO fan scroll. • Universal brush motor, ***0 rpm, F class, included a 2 A fuse with sealed and self-lubricated ball bearings. • Aluminium centrifugal double symmetrical inlet fan wheel. • Waved wire NiCr heating element on a mica frame that incorporates a self-resetable thermal cut-off at *0 ºC. • Nozzle in chrome plated zamak, *2 μ thick. • Two distances (*5/*0 cm) IR electronic detection sensor. |
|||||||||||||||
| * Technical Specifications | |||||||||||||||
|
| * Operation | |||
| Place the hands under the air outlet grill. The dryer will start automatically, and go on with no interruption as long as the hands are kept in the detection range of the sensor till *0seconds. The appliance will stop 3 seconds after the hands are removed from the airflow. | |||
| * Specification | ||
| Surface mounted vandal resistant hand dryer shall be manufactured with one-piece 1 mm thick **4stainless steel with bright finish cover, and fixed to the base by means of 2 vandal-proof lock screws and lock with special wrench. The back base shall be aluminium, 3 mm thick and with 4 holes Ø 8 mm for wall mounting. Cover shall be equipped with a chrome-plated **0º revolving vandal-resistant nozzle for hand and face drying. The nozzle, with an airflow diameter of *7 mm, should be equipped with a 1,5 thick zamak grill to make the inside components inaccessible. The dryer shall be activated through an infrared electronic sensor and shall automatically turn off three second after hands are removed. Motor shall be **0 W, ***0 rpm, universal type, on resilient mounting, B class, with 2 A fuse with sealed, self-lubricated ball bearing. The waved wire NiCr heating element mounted on a mica frame should be located inside the fan scroll, and should incorporate a self-resetable thermal cut-off which will disconnect at *0 ºC. The fan wheel should be of aluminium, centrifugal with double symmetrical inlet, and the fan scroll shall be made of a fire resistant plastic **-V0. Dryer shall deliver **0 m3/h of air at *3 ºC and **1 Km/h velocity during user controlled drying cycle. The dryer shall have a total power of 2.**0 W with a consumption of *0.9 A. Noise level should be *0 dB at 2 m distance. Protection level against water splashes should be rating Ipx1. Overall dimensions shall be **6×**0×**6 mm. Unit shall be VDE approved and CE marked and comply with electrical safety directives *3/*3/CEE & *3/*8/CEE and electromagnetic compatibility directives *9/**6/CEE & *2/*1/CEE. |
| * Installation | |||
| * Serial Installation | ||
| Nº dryers to be fitted: |
|
In toilet areas
with a normal frequency of use and only one wash-basin: 1
dryer. In toilet areas with a normal frequency of use and more than one w |
