Description
Summary
This instrument is
designed and manufactured as per standards GB/T *******8
Determination of Flash Point - Pensky-Martens closed cup
method and ASTM D*3 Standard Test Methods for Flash Point
by Pensky-Martens Closed Cup Tester. It is used to make
determination of the closed cup flash point of the petroleum
products in the temperature range from *0℃ to
**0℃.
I. Main technical
features
1. Simulation tracking
displays function curves of heating up and test
time.
2. Equipped with the
English prompt function of mis-operation.
3. Equipped with prompt
function of test date,test time and other
parameters.
4. Automatically
calibrate the effect of atmospheric pressure to test and calculate
the corrected value.
5. Differential
coefficient detection.Automatically correct the system
deviation.
6. Automatically open
the lid,detect the flash point and print test
data.
7. The test arm rises
up and lowers down automatically.
8. Igniting with
electric igniting gun,forced air cooling.
II. Main technical
specifications and parameters
1. Power
supply:AC(**0±*0%)V, *0Hz.
2. Temperature
measurement:Measuring range: Room
temperature~**0℃.
Test range of flash point:
*1℃~**0℃.
Flash point≤**4℃: error ≤2℃
           
Flash point>**4℃: error
≤6℃
Accuracy: 0.1℃
3. Heating rate:
Procedure A: (5~6)℃/min
Procedure B:(1~1.6)℃/min
Automatic control and manually
adjustable.
4. Stirring rate:(1)
Procedure A: (*0~**0)RPM
(2)
Procedure B: (**0±*0)RPM
Automatic control and manually adjustable.
5. Igniting mode: (1)
Igniting source: gas(or other civilian fuels,the same
below)
(2) Electric ignition. Gas flame
diameter:3.2mm~4.8mm
6. Ambient
temperature:≤ *0℃
7. Relative
humidity:≤ *0ï¼…
8. Total power
consumption:≤ **0W