Optical Time Domain Reflectometer OTDR

Description

  Product Description

TC***0 Series OTDR developed by TECHTX, which meet the needs on the wide range of measurement by FTTX, Metropolitan Area Network, Backbone Network and other optical networks. 
contact: skype: wztechtc icq:********2 
wztech(at)gmail.(com)  
TC***0 OTDR Technical Specifications 

Technical Specifications1 
Wavelength (nm)**0/*******0/*******0/***0/*******5 
Dynamic range (dB)**3/***2/***4/***6/***8/***4/*2/***8/*6/*************5 
Pulse width (ns)5, *0, *0, *0, **0, **0, **0, ****5, *0, *0, *0, **0, **0, **0, ***0, ***0, ***0, ****0, ****0 
Event blind zone (m)*2m2m 
Attenuation blind zone (m)*9m9m 
Linearity (dB/dB)± 0.*5 dB/ dB 
Loss threshold (dB)0.*5 
Loss resolution ratio (dB)0.*1 
Sampling resolution ratio (m)0.**5 to 8 
Sampling point*2K 
Distance uncertainty (m)± (1 m + 5× ***5× Distance + sampling interval) 
Distance scope (km)0.3 to**0 
Typical real-time refreshing duration (s)0.2 
Memory capacity of traceSD Card (2G), > ****0 pieces 
Duration of measurementDefined by user; 5sec, *0sec, *5sec, *0sec, 1min, 2min, and 3min are selectable 
General specification Interface category 
Dimension (H× W× D)**0× **5× *6 Optical interfaceFC/UPC (PC, and APC are selectable) 
Weight1.5kg Data interfaceUSB interface, SD card interface 
TemperatureRunning temperature **0 to *0 
Memory temperature **0 to *0 Visible failure orientation VFL 
Relative humidity0% to *5% (non condensation) Wavelength**0nm 
Power supplyLithium battery; Continuing working duration ? 8 hours Output power (dBm)? *3 
Warranty period*2 months Maximum testing distance3km 
Remarks: 1. The technical specification describes the ensured performance of the instrument when using typical PC model connector to measure. Without considering the uncertainty caused by optical fiber refractivity. 
2. Dynamic range is the data measured under the condition of the maximum pulse width and 3 minutes of average time. Dynamic range is the data measured under the condition of **0km/****0ns/3min. 
3. Measuring conditions of blind zone: Reflection event is within 4Km, reflection strength < **5dB. Measured by the minimum pulse width. 
4. Dynamic range measured when there is filter. 
5. Dynamic range measured when there is no filter.