Carbon fiber felt

Description

The thickness of the hard Felt is divided into *0mm, *0mm, *0mm, *0mm, *0mm, and other specifications.Surface can be coated with a thin graphite, graphite cloth, C / C, SiC and anyother materials. Mainly used in single crystal furnace, carbonization furnace, quartz furnace, vacuum furnace, induction furnace, high frequency furnace and the thermal balance furnace , heat treatment furnace, sintering furnace, welding furnace, high-pressure furnace and high-temperature furnace's insulation and refractory materials 
1, Technical Specifications:
Volume Density (g/cm3):   0.***0.3
Tensile strength (Mpa):   2.5 (Deformation 5%)
Thermal conductivity (W/m.k):   0.***0.*5(*5℃)    0.***0.*5(***0℃)
Resistivity (Ohm.cm):   0.***0.*2
Carbon content (%):  ≥*9.4
ash content (%):  ≤0.5
moisture absorption rate (%):  ≤1.6
Purification level :  *9.3
Treatment temperature (℃):   ********0

2, Specification:
sheet materials :  ***0****0(Max)            (Thickness)：  *****0mm
Tube material:  ￠***0****0(Max)         (Thickness)：  *****0mm
Square tube:  ***0****0****0(Max)       (Thickness)：   *****0mm
Application temperature range (℃): ********0
(Special Size are available on request.)