FOB Price
Get Latest Price|
Minimum Order
Place of Origin:
-
Price for Minimum Order:
-
Minimum Order Quantity:
1 Set
Packaging Detail:
-
Delivery Time:
-
Supplying Ability:
100 Set per Month
Payment Type:
-
China
連絡先担当者 Angel
liuxiang highway, Shanghai, Shanghai
Spec      Type |
LSS0.****0.*-Y/Q |
LSS0.***0.*-Y/Q |
||
Rated evaporation (kg/h) |
*5 |
*0 |
||
Thermal efficiency (%) |
≥*0 |
≥*0 |
||
Rated pressure (MPa) |
0.7 |
0.7 |
||
Steam temperature(℃) |
**0 |
**0 |
||
F |
0# Diesel (kg/h) |
2.2 |
3.2 |
|
Coal gas (Nm³/h) |
6.2 |
8.9 |
||
Natural gas (Nm³/h) |
2.8 |
4.0 |
||
Liquefied gas (kg/h) |
2.*5 |
3.3 |
||
Dimension (mm) |
L |
**0 |
**0 |
|
W |
**0 |
**0 |
||
H |
***0 |
***0 |
||
Steam caliber |
DN*5 |
DN*5 |
||
Drain outlet caliber |
DN*5 |
DN*5 |
||
Water inlet caliber |
DN*5 |
DN*5 |
Note: Diesel oil calorific value is calculated on the basis of ****0kcal/h; natural gas calorific value is calculated on the basis of ***0kcal/m³; gas calorific value is calculated on the basis of ***0kcal/m³; liquid gas calorific value is calculated on the basis of ****0kcal/h.
(No separate notice will be made for any changes of the parameters) Â
1.  |
The boiler design and manufacture
should follow the Technical Supervision Regulation for Safety of
Steam Boilers.
|
2.  |
The heating surface material,
covered electrode and welding wire of the boiler should all have
quality certificates.
|
3.  |
The boiler should be manufactured
according to JB/T***8 Technical Conditions for Manufacturing of
Pressure Parts of Shell Boilers.
|
4.  |
The boiler should be welded
according to JB/T***3 Technical Conditions for Welding of Boiler
Pressure Parts.
|
5.  |
The boiler pressure parts should
be welded by the welder who has passed the examination about
Examination and Administrative Rules for Welders Specializing in
Boilers and Pressure Vessels and Pressure Pipes.
|
6.  |
Boiler non-destructive inspection
and testing should follow JB/T***0 Pressure Equipment
Non-destructive Testing and Article *2 of Technical Supervision
Regulation for Safety of Steam Boilers, **0% inspection should be
carried out for the welded joint, and the boiler with quality not
lower than II is qualified.
|
7.  |
After the boiler manufacturing is
completed, it should be tested according to JB/T***2 Technical
Condition for Testing of Boiler Water Pressure, and the test
pressure is 1.2MPa.
|
8.  |
Â
|