Sell Chlorinated Polyvinyl Chlorine

Description

 
Chlorinated Polyvinyl Chloride
 
Specification:

The CPVC resin is made by chlorination modification of PVC resin and is one advanced engineering material. This product is white or canary loose grain or powder with no smell, odorless and innocuity. After chlorination, the irregularity of molecular bond of the PVC resin and the polarity of molecular chain increase, the dissolvability and chemical stability of the resin also increase, and accordingly improves the heat resistance and resist the corrosion of acid, caustic, salt and oxidant etc. In addition, it improves the mechanical performance of numerical heat distortion temperature and chlorine content increases from *6.7% to ****9% and Vivat softening temperature from ****2 Degrees Celsius to *****5 Degrees Celsius ; its highest service temperature can reach **0 Degrees Celsius and long-term service temperature can reach *5 Degrees Celsius . Accordingly, CPVC is one kind of advanced engineering plastic with vast foreground.
 
Storage and transportation:
 
This product shall be stored in the dry and ventilated warehouse with stack height nor more than *0 bags and avoid solarization and damp. Its transportation must use clean conveyance with covering against solarization, drench and heated. It is innocuous un-dangerous cargo.
 
Application:
 
1.Tubing  CPVC is mainly used for processing tubing and hot water delivery and corrosion medium. It can keep enough strength if the temperature is not more than **0 °C and can be used for long time under higher intrinsic pressure. The weight of CPVC is only one-sixth of that of brass and one-fifth of steel. It has very low thermal conductivity. Therefore, the pipe produced with CPVC has the characters of low weight, good heat insulation performance without heat preservation.
 
2.CPVC pipe can be used as hot sewage pipe, electroplating solution piping, thermochemistry agent transfer piping of enterprises and the wet chlorine transfer piping of Chlorine-Caustic plants.

3.Jet molding parts CPVC resin can be used to produce the fittings of flow pipe, filtering material, and spin-drier etc, as well as electrical appliances and electronic parts such as wire way, conductor protective layer, electric switch, fuse closure door and insulation material of cable. etc.

4.Rolling sheet  It can be used to produce the chemical equipments that can resist chemicals and corrosion, such as reactor, valve, and electrolyser etc.