Description
The biomass gasifier power plant is devided into five parts:
    the biomass gasification
system:biomass feedstocks are fed into the gasifier through feeding
machine,and converted into syngas in the gasification system.raw
material:organic materials(rice husk ,straw,wood chip,coconut
shell,palm shell, bagasse etc.
     Hot syngas conditioning and
cleaning system.there are 2 typical conditioning system for
customers:water purification system and dry purification system.The
purification systems will remove tar, dust,ash and steam. After gas
is cooled down below *0,and dehydrated, it is sent to the
 power generation.
   Ash collection system:after fluid bed
gasification,the ash will be remained in the gasifier and the
automatic ash discharge system will remove ash.
    Control system:consist of alarm
device,explosion-proof device,controlling cabinet,monitoring
device,rapid cut-off valve,to make sure operating easily and
safety.
    The power generation consists of
several internal combustion gen-sets,and the electricity can be
connected to state grid or used by factories. The available
capacity of power plant: **0KW to *0MW.
Syngas  Composition  Table
|
CO |
CH4 |
CnHm |
H2 |
Heat value（LHV） |
|
% |
% |
% |
% |
Kcal/Nm³ |
|
*0 |
*0 |
1.*5 |
*0.3 |
***6 |
Â
|
Heat Value |
≥***2MJ/m³ |
|
Syngas Temperature |
 |
|
Tar Content |
≤*0mg/m³ |
|
H2SÂ Content |
**- |
|
Moiture Content |
≤*5mg/m³ |
|
Dust Granularity |
≤5μm |
|
Dust Content |
≤*0mg/m³ |
Â
