Description
The
introduction of The Ginde PE-RT raised temperature resistant
polyethylene floor heating pipe
Ginde raised temperature resistant
polyethylene (PE-RT) pipe **-the raised temperature resistant
polyethylene total plastic pipe system with excellent performance
as the advantages of excellent hydraulic pressure resistant
performance and special construction, it becomes the best in the
low temperature hot water floor radiation heating
pipes.
The
product advantages
- Light weight :easily transported and
installed.
- The
excellent flexibility makes convenient and convenient when paving ,
the pipe of XZ*****0.*0 can decrease the consumption of the pipe
fittings by coiling and bending and so on methods ,decrease the
construction cost
- When
the pipe is bent, the stress of the bent part will loose quickly,
it is not suitable to appear “back”, convenient for construction
cost.
- The
friction loss in pipe is low ,the transporting fluid ability of
this pipe is *0% more than the metal pipe with the same
diameter.
- Low
brittle rupture temperature ,the XZ****0.*0 pipe material has
excellent low temperature resistant performance ,so it can
construct under the consideration of low temperature in winter, and
there is no need for preheating ,which can solve inconvenience that
it is too cold to construct in the north area of our country;
Good chemical corrosion resistance, no rust, long
lifetime.
- Hot-melting connection, forming full closed
seepage prevention system
- Good
environment suitability
- Under normal condition ,the pipe can be used
safely for *0 years.
- The
XZ ****0.*0 has passed in the health permission of FDA and TUV ,the
pipe does not add any poisonous auxiliaries, it does not foul in
inner wall, does not breed bacteria ,so it can be applied in
domains of potable water transportation.
- Good
resistance to impact performance
- Good
heat dispersion , a lot of energy can be saved in the heating
application.
Connection
way
There are two connection ways in
the Ginde PE-RT pipe ,one is mechanical connection between the
Ginde brand water separator and brass fittings, and another is the
hot melting connection of the plastic pipe fittings with the same
material.
The Ginde brand brass fittings,
complete specifications, the main body uses HPb***2 brass, fine
finished through the processes of saw cutting, heating
forging , flash trimming, machine process, surface treatment
,assemble .the characteristics are high density, good sealing
performance , long lifetime, safe and health . Especially the
forging process is used in heating working, which can prevent
completely the air hole , trachoma, eliminating the dangerous
.
The
Ginde PE-RT pure plastic pipe fittings are the special pipe
fittings which for the PE-RT pipe.The shade is made more beautiful
,the inner wall of the Ginde PE-rt pipe fitting is smooth, raised
emperature resisant, hot-melting connection is safe and reliable ,
health without poisonous.
Product
standard
In
order to make the PE-RT pipe reach the standardization production,
together with Dow chemical Investment Company, The Ginde company
drafts out the Heat-resistant polyethylene pipe system for cold and
hot water industry standard, the standard number is CJ/T
*******2
Production
specification
