Description
Habasit Product Data Sheet
F*1
View this Data Sheet as PDF
Product Designation
Product Group: Polyamide machine tapes
Product Sub-Group: -
Main Industry Segments: Paper manufacturing and
processing
Belt Applications: Machine tape
Special Features: Abrasion resistant; Constant
coefficient of friction; Constant grip and release property;
Forgiving in case of short term shock like overloads
Mode of Use/Conveyance: Declined; Horizontal;
Inclined; Twists with short center distance; Vertical
Product Design (enlarged)
Product Construction/Design
Conveying Side (Material):
Acrylonitrile-Butadiene-Rubber (NBR)
Conveying Side (Surface):
Rough structure
Conveying Side (Property):
Adhesive
Conveying Side (Color):
Green
Traction Layer (Material):
Polyamide (PA)
Number of Fabrics: 2
Running Side/Pulley Side
(Material): Acrylonitrile-Butadiene-Rubber
(NBR)
Running Side/Pulley Side (Surface):
Impregnated fabric
Running Side/Pulley Side Property:
Non-adhesive
Running Side/Pulley Side (Color):
Green
Product Characteristics
Slider bed suitable: Yes
Carrying rollers suitable: Yes
Troughed installation suitable: No
Antistatically equipped: Yes
All data are approximate values under standard climatic conditions:
*3°C/*3°F, *0% relative humidity (DIN ****5/ISO **4), and are based
on the Master Joining Method.
Technical Data
Thickness: 1.*5 mm
0.*5 in.
Mass of belt (belt weight): 1.*5
kg/m2 0.*6
lbs./sq.ft
Pulley diameter minimum with counter flection:
*0 mm 1.6
in.
Tensile force for 1% elongation (k1% static) per unit of width
(Habasit Standard SOP****5 / EN ISO****1):
8.5 N/mm *9
lbs./in.
Tensile force for 1% elongation after relaxation (k1% relaxed) per
unit of width (Habasit Standard SOP****5 / EN ISO
****1): 2.6 N/mm
*5 lbs./in.
Operating temperature admissible (continuous):
Min **0
Max **0 °C
°C Min *4
Max **2 °F
°F
Coefficient of friction of driving pulley of steel:
0.*5 [-]
0.*5 [-]
Seamless manufacturing width: ***0
mm *7 in.
All data are approximate values under standard climatic conditions:
*3°C/*3°F, *0% relative humidity (DIN ****5/ISO **4), and are based
on the Master Joining Method.
Chemical Resistance
Chemical Resistance Class: 2 (for details, see
separate overview)
Remark: These indications are not guarantees of
properties.
Resistant to: All solids; Dirt; Dryness; Fats;
Humidity; Mildew; Oils; Putrefaction
Limited resistance to: None
Not resistant to: Caustic Soda > *0%;
Chlorinated hydrocarbons; Concentrated organic and inorganic acids;
Cresols; Hydrochloric acid > *0%; Sulphuric acid > *0%
Calculations
For most applications calculation is not required. Should you still
need a calculation: please ask Habasit.
Installation and Handling Instructions
Do not go below initial elongation (epsilon) ~0.5%.; Install the
slack belt and tension until running perfectly under the full belt
load.
Storage
For details consult \'Storage and handling requirements for belts
and machine tapes\' or contact Habasit.; Protect belts from
sunlight/UV-radiation/dust and dirt. Store spare belts in a cool
and dry place and if possible in their original packaging.
Joining System
Master Joining Method: Thermofix
Remarks: Master joining method for standard
applications
Link to Joining Data Sheet
Alternative Joining Method: Mechanical joining
Remarks: Optional joining method
Limitations
Keep belt edges free of any installation/machine contact; This
product has not been tested according to ATEX standards
(atmospheres with explosion risk - ATEX *5 regulation or EU
directive *4/9) and therefore is subject to user’s analysis in the
respective environment.
Legend
All data are approximate values under standard climatic conditions:
*3°C/*3°F, *0% relative humidity (DIN ****5/ISO **4), and are based
on the Master Joining Method.
* No calculation Value
2) Product containing different coating materials
such as elastomer‚ natural fibers‚ silicones‚ etc.‚ are not subject
to the directive ***2/*2/EC
3) CLA: Coordination of the centre line-average
value Ra (in the US also Arithmetical Average (AA)) to the maximum
peak to valley height Rt for surfaces manufactured by chip
removal.
8) Due to high coefficient of friction of
running/pulley side‚ the suitability for use on slider beds is
limited
BfR German federal institute for risk assessment
(Bundesinstitut fuer Risikobewertung)
EEC European Economic Community
EU European Union (Directive ***2/*2/EC)
FDA Food and Drug Administration
NA Not available
NAP Not applicable
USDA United States Department of Agriculture
(Food Safety and Inspection Service‚ Washington D.C.)
Quality System (certified)
Independant certification bodies, worldwide, attest that Habasit AG
Switzerland, its affiliated manufacturing companies and the sales
organization possess efficient organizational, technical and human
resources to maintain, guarantee and provide consistently high
quality products and services, to the requirements of the ISO
***1/***0 Quality management systems standard.
Certified Manufacturing Sites :
Habasit AG, Switzerland : Registered by SQS, CH ***2 Zollikofen,
Switzerland, since ***7.
Habasit UK : Registered by SGS Yarsley, Camberley, Surrey, UK,
since ***2
Habasit Italiana, Vigliano : Registered by Det Norske Veritas,
Agrate Brianza, Italy, since ***2.
Plastomeccanica : Registered by Det Norske Veritas, Agrate Brianza,
Italy, since ***1.
Habasit America Buffalo, New York : Registered by ISOQAR, United
Kingdom, since ***6.
Habasit America Middletown, Connecticut : Registered by ISOQAR,
United Kingdom, since ***6.
Product Liability, Applications Considerations
If the proper selection and application of Habasit products are not
recommended by an authorized Habasit sales specialist, the
selection and application of Habasit products, including the
related area of product safety, are the responsibility of the
customer.
All indications / information are recommendations and believed to
be reliable, but no representations, guarantees, or warranties of
any kind are made as to their accuracy or suitability for
particular applications. The data provided herein are based on
laboratory work with small-scale test equipment, running at
standard conditions, and do not necessarily match product
performance in industrial use. New knowledge and experiences can
lead to modifications and changes within a short time without prior
notice.
BECAUSE CONDITIONS OF USE ARE OUTSIDE OF HABASIT’S AND ITS
AFFILIATED COMPANIES CONTROL, WE CANNOT ASSUME ANY LIABILITY
CONCERNING THE SUITABILITY AND PROCESS ABILITY OF THE PRODUCTS
MENTIONED HEREIN. THIS ALSO APPLIES TO PROCESS RESULTS / OUTPUT /
MANUFACTURING GOODS AS WELL AS TO POSSIBLE DEFECTS, DAMAGES,
CONSEQUENTIAL DAMAGES, AND FURTHER-REACHING CONSEQUENCES.
Last modification on *********9
